{"product_id":"boneham-pt3616id-press-fit-headless-drill-bushing-steel","title":"Boneham PT3616ID Press Fit Headless Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM PT3616ID is a press fit headless drill bushing designed to guide drill bits and cutting tools with precision in production and tooling applications. Built to Industry Code P, this bushing features an inside diameter of 0.295 inches, a body outside diameter of 9\/16 inches, and an overall length of 1 inch. Constructed from steel hardened to 60 to 65 HRC, it provides the wear resistance required for repetitive drilling operations. The headless design allows for flush or sub-flush installation in jig plates without a protruding flange. Machinists, tool and die makers, and manufacturing engineers install this type of bushing in drill jigs and fixtures.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in drill jig assemblies in both production shop and toolroom environments. It is a non-renewable, permanently pressed-in component, meaning it is intended to remain fixed in the jig plate for the life of the fixture or until the plate is reworked. The 0.295 inch bore corresponds to Letter Drill Size M, making it appropriate for guiding M-size drill bits in controlled-feed drilling operations. Typical applications include metal fabrication, aerospace component drilling fixtures, and general manufacturing tooling setups where hole location accuracy is critical.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method — permanently seats in the jig plate bore without fasteners\u003c\/li\u003e\n  \u003cli\u003eHeadless design allows flush mounting in tight fixture layouts\u003c\/li\u003e\n  \u003cli\u003e0.295 inch inside diameter with a tight tolerance of +0.0001 to +0.0005 inches for accurate drill guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for high wear resistance\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n  \u003cli\u003eNon-renewable, fixed-fit design for permanent jig plate installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a permanent press fit replacement or new-installation drill bushing for drill jig plates requiring a 9\/16 inch bore hole and an M-size or 0.295 inch drill guide bore, conforming to ANSI drill bushing standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or tool and die makers using an arbor press or hydraulic press to seat the bushing flush into a precision-reamed hole in the jig plate. Power down all associated machinery before working on or near jig fixtures. Do not hammer the bushing directly without a proper driver to avoid damaging the bore or the jig plate. Once pressed in, this bushing is not intended for removal and reuse.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.2950 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter Size)\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT3616ID\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51737607176498,"sku":"PT3616ID","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_814a4fe8-524e-46ba-bac6-cc6f1b600902.jpg?v=1788791294","url":"https:\/\/voomisupply.com\/products\/boneham-pt3616id-press-fit-headless-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}