{"product_id":"boneham-pt286hx-press-fit-headless-drill-bushing","title":"Boneham PT286HX Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM PT286HX is a press fit headless drill bushing used to guide drill bits and other cutting tools with precision in jig and fixture applications. Manufactured from hardened steel with a Rockwell hardness of 60 to 65 HRC, this bushing resists wear during repetitive drilling operations. It features a 9\/32 inch inside diameter, a 7\/16 inch body outside diameter, and a 3\/8 inch overall length. The headless design allows the bushing to sit flush within a jig plate, making it well suited for close-tolerance work. Machinists, tool and die makers, and production floor technicians install this type of bushing as a fixed, non-renewable guide in drilling fixtures.\u003c\/p\u003e\n\u003cp\u003eThe PT286HX is intended for use in drill jigs where a permanent, flush-mount bushing is required. The headless profile eliminates any protrusion above the jig plate surface, which is useful when workpiece clearance is limited or when multiple bushings are installed in a shared plate. This bushing conforms to ANSI standards and carries the industry code P, identifying it within the standard press fit headless bushing series. It is a direct-installation component requiring no liner or locking mechanism.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method for a permanent, secure fit in the jig plate bore\u003c\/li\u003e\n  \u003cli\u003eHeadless design sits flush with the plate surface for low-clearance applications\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear resistance\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eANSI-compliant geometry under bushing industry code P\u003c\/li\u003e\n  \u003cli\u003eNon-renewable fixed bushing — no liner required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation component for drill jigs and fixtures requiring a press fit headless bushing with a 9\/32 inch inside diameter and 7\/16 inch outside diameter per ANSI P-series standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or tool and die makers using an arbor press to drive the bushing into a precision-bored plate hole. The mating bore in the jig plate must be machined to the correct interference fit tolerance before pressing the bushing in place. Do not hammer the bushing in freehand, as this can damage the bushing bore or distort the jig plate. Once pressed in, this bushing is not intended for removal and reuse.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 9\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 7\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT286HX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51731202244914,"sku":"PT286HX","price":16.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_41d39787-4be9-4580-91d8-140a04e50803.jpg?v=1788728241","url":"https:\/\/voomisupply.com\/products\/boneham-pt286hx-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}