{"product_id":"boneham-pt2812hp-headless-drill-bushing-0-266-id-7-16-od","title":"Boneham PT2812HP Headless Drill Bushing 0.266 Id 7\/16 Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM PT2812HP is a press fit headless drill bushing designed to guide cutting tools accurately during drilling, reaming, and boring operations. Built to ANSI standards from hardened steel, this bushing seats flush in a drill jig plate without a protruding head flange, making it the right choice for applications where clearance is tight or a smooth surface is required. The inside diameter is 0.266 inches with a tolerance of +0.0001 to +0.0005 inches, providing the precise tool guidance that production and toolroom environments demand. Hardness runs 60 to 65 HRC, ensuring long service life under repeated tool passes. Machinists, tool-and-die makers, and jig builders are the typical installers.\u003c\/p\u003e\u003cp\u003eThe PT2812HP suits metalworking and fabrication environments where consistent hole location is critical across multiple workpieces. Its headless design integrates cleanly into drill jig plates used in production machining, assembly fixtures, and quality-control tooling. The 3\/4-inch overall length provides sufficient bearing surface to maintain tool alignment through the full depth of most standard jig plates. This bushing is a fixed, non-renewable type, intended for permanent press-fit installation rather than quick-change service.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePress fit installation method seats the bushing permanently into the jig plate bore\u003c\/li\u003e\n\u003cli\u003eHeadless design allows flush mounting where a flanged head would interfere\u003c\/li\u003e\n\u003cli\u003e0.266 inch inside diameter with +0.0001 to +0.0005 inch tolerance for precise tool guidance\u003c\/li\u003e\n\u003cli\u003eHardened steel construction at 60 to 65 HRC resists wear during high-cycle drilling operations\u003c\/li\u003e\n\u003cli\u003e3\/4 inch overall length provides stable tool alignment through standard jig plate thicknesses\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard press fit headless drill bushing with Bushing Industry Code P, suitable for use in drill jigs and fixture plates requiring a 7\/16 inch body outside diameter bore.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation requires an arbor press or hydraulic press to seat the bushing flush and square into the prepared jig plate bore. The mating bore in the plate should be finish-reamed to the appropriate press fit tolerance for a 7\/16 inch OD bushing before installation. Do not hammer the bushing in freehand, as this can damage the ID bore geometry or cause the bushing to seat at an angle. Once pressed in, the bushing is not designed for removal and reinstallation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.266 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter Size)\u003c\/strong\u003e: H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Size)\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT2812HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51728252764466,"sku":"PT2812HP","price":18.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_71013ae8-f381-4955-99fa-0303e29a6db3.jpg?v=1788690084","url":"https:\/\/voomisupply.com\/products\/boneham-pt2812hp-headless-drill-bushing-0-266-id-7-16-od","provider":"Voomi Supply","version":"1.0","type":"link"}