{"product_id":"boneham-pt2412gd-press-fit-headless-drill-bushing","title":"Boneham PT2412GD Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM PT2412GD is a press fit headless drill bushing designed to guide drill bits and other cutting tools with precision in jig and fixture applications. With a 0.201 inch inside diameter (wire size No. 7), a 3\/8 inch body outside diameter, and a 3\/4 inch overall length, this bushing fits tightly into a mating hole without the use of a retaining head or lock. The headless profile sits flush with the jig plate surface, making it well suited for close-tolerance work where a head flange would interfere with workpiece seating. Hardness runs 60 to 65 HRC, providing the wear resistance needed for repetitive production drilling operations. Machinists, tool and die makers, and jig builders are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs, fixture plates, and tooling bodies across metalworking and machining environments, both in job shops and production facilities. The press fit installation method means the bushing is driven or pressed directly into a reamed hole in the jig plate and is intended to remain permanently in place. It is not a renewable or slip-fixed style bushing. Typical applications include guiding twist drills, reamers, and similar tools in repetitive hole-location operations where consistent positional accuracy is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.201 inch inside diameter (wire size No. 7) with a tight tolerance of +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003ePress fit installation for permanent, fixed positioning in jig plates\u003c\/li\u003e\n  \u003cli\u003eHeadless design sits flush with jig surface, eliminating interference with workpiece contact\u003c\/li\u003e\n  \u003cli\u003e60 to 65 HRC hardness for extended wear life in repetitive drilling applications\u003c\/li\u003e\n  \u003cli\u003eSteel construction — not counterbored, not renewable\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing geometry and tolerancing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation drill bushing for standard ANSI-compliant press fit headless bushing applications in jig and fixture tooling.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed by machinists or tool and die makers using an arbor press or hydraulic press into a precision-reamed hole sized to the bushing outside diameter tolerance. Power down all machinery before handling tooling components. The bushing is not designed for removal after installation — use a renewable bushing style if changeout will be required. Verify hole preparation meets ANSI press fit specifications before driving the bushing to avoid galling or dimensional distortion.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.201 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Size)\u003c\/strong\u003e: No. 7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT2412GD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51730617270578,"sku":"PT2412GD","price":18.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_13fdb8b5-f10a-4244-8ca4-abb10878f312.jpg?v=1788720368","url":"https:\/\/voomisupply.com\/products\/boneham-pt2412gd-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}