{"product_id":"boneham-pt2010fh-press-fit-headless-drill-bushing","title":"Boneham PT2010FH Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM PT2010FH is a press fit headless drill bushing designed to guide twist drills and other cutting tools with precision during machining operations. Manufactured from steel and hardened to 60 to 65 HRC, this bushing delivers consistent bore guidance and extended service life under repeated use. The headless profile sits flush with the jig plate surface, making it suited for applications where a protruding flange would interfere with workpiece clearance. With an inside diameter of 0.173 inches and a body outside diameter of 5\/16 inches, this bushing conforms to ANSI standards for type P drill bushings and is pressed permanently into the jig body.\u003c\/p\u003e\u003cp\u003eThis bushing is intended for use in drill jigs and fixture plates across production machining environments, tool rooms, and precision fabrication shops. The press fit installation method means the bushing is driven or pressed into a prepared hole and is not designed for removal and replacement. It is appropriate for guiding drilling operations in both manual drill press setups and CNC fixture applications where repeatable hole location is required. Machinists, tool and die makers, and fixture builders are the typical installers of this component.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eInside diameter of 0.173 inches (wire gauge size 17) for precise drill guidance\u003c\/li\u003e\n\u003cli\u003eBody outside diameter of 5\/16 inches and overall length of 5\/8 inches\u003c\/li\u003e\n\u003cli\u003eHardened steel construction rated at 60 to 65 HRC for wear resistance\u003c\/li\u003e\n\u003cli\u003eHeadless design for flush mounting in jig plates without flange protrusion\u003c\/li\u003e\n\u003cli\u003ePress fit installation for permanent, fixed positioning in the jig body\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for type P drill bushings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard type P press fit headless drill bushing for use in drill jigs and fixture plates requiring a permanent, non-renewable bushing with a 5\/16 inch body outside diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a machinist or tool and die maker using an arbor press or appropriate pressing fixture to drive the bushing squarely into a precision-reamed hole in the jig plate. The receiving hole should be machined to the correct interference fit tolerance before pressing to avoid bushing distortion or bore damage. Because this is a non-renewable bushing, it is not intended to be removed once installed. Verify bore alignment and jig setup before pressing to final seating depth.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.173 inches (Wire Gauge 17)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT2010FH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51737740738866,"sku":"PT2010FH","price":18.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_af0f1e95-9daf-4972-9c06-5e673d491200.jpg?v=1788793020","url":"https:\/\/voomisupply.com\/products\/boneham-pt2010fh-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}