{"product_id":"boneham-pt2010eq-press-fit-headless-drill-bushing","title":"Boneham PT2010EQ Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM PT2010EQ is a press fit headless drill bushing designed to guide cutting tools accurately during drilling, reaming, and boring operations. Classified under industry code P, this bushing features a 0.152 inch inside diameter, a 5\/16 inch outside diameter, and a 5\/8 inch overall length. It installs without fasteners by pressing directly into a jig or fixture plate, seating flush with the surface. Made from steel hardened to 60 to 65 HRC, the PT2010EQ delivers the wear resistance required for repetitive production work. Machinists and tool-and-die professionals rely on this type of bushing to maintain hole location accuracy across high-volume part runs.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jig fixtures for production machining environments, tool rooms, and precision fabrication shops. The headless design makes it well suited for applications where a flush or countersunk installation is required and a flanged head would interfere with workpiece seating. The 0.152 inch ID corresponds to a Number 24 wire gauge drill size, making it appropriate for close-tolerance guide applications in both ferrous and non-ferrous workpiece materials. It is a non-renewable (fixed) bushing, meaning it is pressed permanently into the jig plate rather than designed for quick-change replacement.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation seats the bushing flush without additional fasteners or locking collars\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction at 60 to 65 HRC for extended wear life in production drilling\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of plus 0.0001 to plus 0.0004 inches maintains precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eHeadless design eliminates flange interference for flush-mount jig plate applications\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI standards for drill bushing geometry and dimensional tolerances\u003c\/li\u003e\n  \u003cli\u003eNon-renewable fixed design for permanent installation in dedicated drill fixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a press fit, non-renewable headless drill bushing conforming to ANSI P-series standards, suitable for use in drill jig plates and fixture tooling requiring a 5\/16 inch bore for bushing installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or toolmakers using an arbor press or hydraulic press to seat the bushing into a properly toleranced jig plate bore. The receiving bore in the jig plate must be machined to the appropriate press fit tolerance to ensure secure retention without distorting the bushing ID. Do not drive the bushing with a hammer directly on the bore face, as this can damage the ground inside diameter. Because this is a non-renewable bushing, removal typically requires the bushing to be pressed or drilled out, making correct initial installation critical.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.152 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Gauge)\u003c\/strong\u003e: Number 24\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT2010EQ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51731516260658,"sku":"PT2010EQ","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_bbe21846-ee92-4cda-bfc7-77ea943d1164.jpg?v=1788732016","url":"https:\/\/voomisupply.com\/products\/boneham-pt2010eq-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}