{"product_id":"boneham-pt2010eg-press-fit-headless-drill-bushing","title":"Boneham PT2010EG Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM PT2010EG is a press fit headless drill bushing used to guide twist drills, reamers, and other cutting tools with precision in jig and fixture applications. This bushing carries industry code P and features a 9\/64-inch inside diameter, a 5\/16-inch outside diameter, and a 5\/8-inch overall length. It is manufactured from steel hardened to 60 to 65 HRC, providing the wear resistance needed to maintain hole-location accuracy through repeated production runs. Machinists, tool and die makers, and fixture builders install this component directly into a drill jig plate using an arbor press or similar interference-fit method, with no head to limit stack height.\u003c\/p\u003e\n\u003cp\u003eThis bushing suits standard press fit jig plate installations in general machining environments. Its headless profile makes it appropriate for applications where a flush or sub-flush bushing surface is required. The P-series designation conforms to ANSI standards for drill bushing dimensions, making it a direct-fit choice in jigs designed to that specification. It is sold individually and fits production, toolroom, and maintenance machining operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method — no liner bushing required\u003c\/li\u003e\n  \u003cli\u003eHeadless design allows flush seating in jig plates\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eANSI-standard P-series dimensions for compatibility with standardized jig designs\u003c\/li\u003e\n  \u003cli\u003eCompact overall length of 5\/8 inches suits thin jig plate configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard P-series press fit headless drill bushing for use in drill jigs and fixtures requiring a 5\/16-inch outside diameter press fit bore and a 9\/64-inch tool guide bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolmaker using an arbor press to drive the bushing into a properly sized jig plate bore. The receiving bore must be machined to the correct interference fit tolerance to ensure the bushing seats without rotation or axial movement during drilling. Power down and secure any equipment associated with the jig before replacing a worn bushing. Do not hammer the bushing in freehand, as this can cause misalignment or damage to the bore wall.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 9\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT2010EG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51755556307250,"sku":"PT2010EG","price":18.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_6512cdb5-db3a-488a-a56e-6400dda0f4c8.jpg?v=1788956035","url":"https:\/\/voomisupply.com\/products\/boneham-pt2010eg-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}