{"product_id":"boneham-p648mm-press-fit-headless-drill-bushing","title":"Boneham P648MM Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM P648MM is a Type P press fit headless drill bushing used to guide drill bits and cutting tools with precision in jig and fixture applications. Manufactured from steel and hardened to 60 to 65 HRC, it provides consistent bore location and resists wear under repeated tooling passes. The headless design seats flush with the jig plate surface, making it suitable for installations where a protruding flange would interfere with workpiece clearance. Inside diameter is 21\/32 inches with a tolerance of +0.0001 to +0.0005 inches, ensuring close tool guidance. Outside diameter is 1 inch and overall length is 1\/2 inch.\u003c\/p\u003e\u003cp\u003eThis bushing is used in drill jigs, fixture plates, and tooling setups across general machining, fabrication, and production environments. The press fit installation method means the bushing is driven or pressed into a prepared hole in the jig body, where it is retained by interference fit without fasteners or locking rings. It is not renewable and is intended as a permanent installation. Machinists, toolmakers, and fixture builders are the typical installers. Meets ANSI standards for drill bushing geometry and fit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType P headless design seats flush with jig plate for unobstructed workpiece contact\u003c\/li\u003e\n\u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life under high-cycle drilling\u003c\/li\u003e\n\u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n\u003cli\u003ePress fit installation requires no locking hardware or retaining rings\u003c\/li\u003e\n\u003cli\u003eMeets ANSI drill bushing standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard Type P press fit headless drill bushing suitable for use in jig plates and fixture bodies bored to accept a 1-inch outside diameter press fit bushing.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a toolmaker or machinist using an arbor press or hydraulic press. The receiving hole in the jig plate must be bored to the correct interference fit tolerance before pressing. Thoroughly clean and deburr the bore before installation to avoid galling the bushing OD. Because this is a non-renewable bushing, it is not designed for field removal and reinstallation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 21\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P648MM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51734823960882,"sku":"P648MM","price":19.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_71ad56c2-d011-4666-a3a0-28176c72949c.jpg?v=1788767163","url":"https:\/\/voomisupply.com\/products\/boneham-p648mm-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}