{"product_id":"boneham-p565lk-press-fit-headless-drill-bushing","title":"Boneham P565LK Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM P565LK is a headless press fit drill bushing designed to guide drill bits with precision in jig and fixture applications. It carries an inside diameter of 0.5 inches and a body outside diameter of 0.875 inches, with an overall length of 0.3125 inches. Manufactured from hardened steel and rated at 60 to 65 HRC, this bushing resists wear through repeated drilling cycles. It is installed without a head, keeping a low profile where surface clearance is limited. This type of bushing is a standard consumable in precision machining and fabrication shops.\u003c\/p\u003e\n\u003cp\u003eThe P565LK is used in press fit drill jig applications where a permanent, non-renewable bushing is required. The headless design suits fixtures where a flush or near-flush surface is needed on the jig plate. Typical users include machinists, tool and die makers, and production fabricators working with drill jigs that require consistent hole location across repeated operations. This bushing conforms to ANSI standards and fits the Industry Code P bushing classification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHeadless press fit design installs flush for low-profile fixture applications\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches ensures precise drill bit guidance\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction rated at 60 to 65 HRC for extended service life\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI standards for Industry Code P drill bushings\u003c\/li\u003e\n  \u003cli\u003eNon-renewable design provides a permanent, stable bushing seat in the jig plate\u003c\/li\u003e\n  \u003cli\u003eCompact overall length of 0.3125 inches suits thin jig plate configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or original fitment for drill jigs and fixtures requiring a Code P headless press fit bushing with a 0.5 inch inside diameter and 0.875 inch outside diameter per ANSI standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are typically installed by machinists or tool and die technicians using an arbor press to achieve proper seating without damaging the bore. Ensure the jig plate hole is machined to the correct interference fit tolerance before pressing in the bushing. Do not hammer the bushing directly without a driver to avoid distortion. Once installed, a headless press fit bushing is considered permanent and is not intended for removal and reuse.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 0.3125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P565LK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51734022422834,"sku":"P565LK","price":20.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_33efdf6e-27ab-4904-8a4e-36ab6d7062ca.jpg?v=1788760525","url":"https:\/\/voomisupply.com\/products\/boneham-p565lk-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}