{"product_id":"boneham-p4812lk-press-fit-headless-drill-bushing","title":"Boneham P4812LK Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM P4812LK is a press fit headless drill bushing designed to guide twist drills and reamers with precision in jig and fixture applications. This is a Type P bushing per ANSI standards, with a 0.5-inch inside diameter, a 0.75-inch outside diameter, and an overall length of 0.75 inches. Manufactured from hardened steel, it achieves a surface hardness of 60 to 65 HRC, giving it the wear resistance required for repeated drilling cycles in production environments. The inside diameter holds a tolerance of +0.0001 to +0.0005 inches, ensuring consistent drill guidance and hole location accuracy. Licensed machinists, tool-and-die makers, and jig builders are the typical end users for this component.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs, fixtures, and tooling plates where a permanent, flush-mount guide is required. The headless profile keeps the bushing flush with the jig plate surface, which is useful when clearance above the workpiece is limited or when a clean flat surface is needed. The press fit installation method means the bushing is driven into a prepared hole in the jig plate and is not intended for removal and replacement during normal service. It is not a renewable bushing. Applications span general metalworking, precision machining, and production tooling across both job-shop and manufacturing environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType P headless profile sits flush with the jig plate surface for low-clearance applications\u003c\/li\u003e\n  \u003cli\u003ePress fit installation locks the bushing permanently in the tooling plate bore\u003c\/li\u003e\n  \u003cli\u003e60 to 65 HRC hardness provides high wear resistance under repeated drilling contact\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches ensures precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensional conformance\u003c\/li\u003e\n  \u003cli\u003eSteel construction suitable for use in production metalworking fixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard Type P press fit headless drill bushing for use in drill jigs and tooling fixtures requiring a 0.5-inch inside diameter and a 0.75-inch outside diameter press fit bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolmaker using an arbor press to drive the bushing into a precision-reamed hole in the jig plate. The receiving bore must be sized to achieve proper press fit interference before installation. Once pressed in, the bushing is permanent and is not designed for removal. Always ensure the jig plate and workpiece are secured before beginning any drilling operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.057 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P4812LK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51750663553330,"sku":"P4812LK","price":17.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_b29400a9-b125-44d1-918e-1c5c549ed4dd.jpg?v=1788918051","url":"https:\/\/voomisupply.com\/products\/boneham-p4812lk-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}