{"product_id":"boneham-p326ih-press-fit-headless-drill-bushing-steel","title":"Boneham P326IH Press Fit Headless Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM P326IH is a press fit headless drill bushing used to guide drill bits and cutting tools with precision in machining and fabrication setups. This industry code P bushing features a 0.302 inch inside diameter, a 1\/2 inch body outside diameter, and a 3\/8 inch overall length. It is manufactured from steel and hardened to 60 to 65 HRC, providing the wear resistance required for repetitive drilling operations in jigs and fixtures. Installation is permanent — the headless design seats flush with the jig plate surface, making it well suited for applications where a protruding head would interfere with workpiece contact or clamping.\u003c\/p\u003e\n\u003cp\u003eThis bushing is appropriate for use in drill jigs across light and heavy industrial manufacturing environments. The headless configuration is commonly chosen when the bushing must sit below or flush with the top surface of a jig plate. Machinists, tool and die makers, and precision fabricators working with drill jig assemblies are the primary installers. The 0.302 inch ID accommodates the corresponding wire gauge drill bit and is sized to ANSI standards for interchangeability within compatible jig plate setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened steel construction rated 60 to 65 HRC for long service life in high-cycle drilling operations\u003c\/li\u003e\n  \u003cli\u003eHeadless design seats flush with jig plate surface, eliminating interference with workpiece seating\u003c\/li\u003e\n  \u003cli\u003ePress fit installation method provides a permanent, non-renewable mount with no mechanical fasteners required\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of plus 0.0001 to plus 0.0005 inches for consistent drill guidance\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensional interchangeability\u003c\/li\u003e\n  \u003cli\u003eCompact 3\/8 inch overall length suits thin jig plate applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation press fit headless drill bushing for use in drill jigs and fixture plates requiring a P-series industry code bushing with a 0.302 inch inside diameter and 1\/2 inch outside diameter per ANSI standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed by a machinist or toolmaker using an arbor press or hydraulic press — never driven in with a hammer, as this can distort the bore or damage the jig plate. The mating hole in the jig plate should be machined to the appropriate interference fit tolerance before installation. Once pressed in, the P326IH is a permanent, non-renewable bushing and is not designed for removal and reuse. Verify bore alignment and surface finish of the plate hole prior to pressing to ensure concentricity and full seating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal Inch)\u003c\/strong\u003e: 0.302 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter)\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P326IH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51750657622322,"sku":"P326IH","price":16.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_79a6da6a-3761-4351-8e6b-4cccbff33881.jpg?v=1788917938","url":"https:\/\/voomisupply.com\/products\/boneham-p326ih-press-fit-headless-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}