{"product_id":"boneham-p324im-press-fit-headless-drill-bushing","title":"Boneham P324IM Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM P324IM is a Type P press fit headless drill bushing machined from steel and hardened to 60 to 65 HRC. It is designed to guide twist drills and other cutting tools with precision during repetitive drilling operations on jigs and fixtures. The bushing presses directly into a hardened jig plate without the need for a locking collar or head flange. With a 5\/16 inch inside diameter and a 1\/2 inch outside diameter, it provides consistent hole location accuracy and resists wear across high-cycle production runs. Machinists, tool and die makers, and fixture builders install this type of bushing as a standard component in drill jig assemblies.\u003c\/p\u003e\u003cp\u003eThis bushing is suited for use in drill jig plates on the shop floor in both production machining and toolroom environments. It is appropriate for light to medium drilling applications where a permanent, non-renewable bushing is acceptable. The 1\/4 inch overall length makes it a compact fit in thinner jig plates. It conforms to ANSI standards for drill bushing dimensions, making it a direct drop-in replacement for worn Type P bushings of the same size.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePress fit installation — no locking ring or head flange required\u003c\/li\u003e\n\u003cli\u003eInside diameter tolerance of plus 0.0001 to plus 0.0005 inches for precise tool guidance\u003c\/li\u003e\n\u003cli\u003eHardened steel construction rated 60 to 65 HRC for extended wear life\u003c\/li\u003e\n\u003cli\u003eHeadless, non-renewable Type P design for permanent jig plate installation\u003c\/li\u003e\n\u003cli\u003eMeets ANSI dimensional standards for drill bushings\u003c\/li\u003e\n\u003cli\u003eCompact 1\/4 inch overall length suits thin jig plate applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard Type P press fit headless drill bushing replacement for drill jigs and fixtures requiring a 5\/16 inch inside diameter and 1\/2 inch outside diameter bushing.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by press fitting the bushing into a properly sized and finished jig plate bore using an arbor press or hydraulic press. The receiving bore should be machined to the appropriate tolerance for an interference fit per ANSI standards for drill bushing installation. Do not hammer the bushing in by direct impact without a driver to avoid damage to the bore or the bushing face. This is a non-renewable bushing and is not intended to be removed and reused once pressed in place.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type P Press Fit Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 5\/16 inches (0.3125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P324IM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51735742939442,"sku":"P324IM","price":15.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_a596c5da-b1b2-454c-ba9b-ab3713c7bc5b.jpg?v=1788773889","url":"https:\/\/voomisupply.com\/products\/boneham-p324im-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}