{"product_id":"boneham-p3222gf-press-fit-headless-drill-bushing-steel","title":"Boneham P3222GF Press Fit Headless Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM P3222GF is a press fit headless drill bushing designed to guide drill bits and cutting tools with precision in jig and fixture applications. Built from hardened steel with a hardness rating of 60 to 65 HRC, this bushing resists wear through repeated drilling cycles. It features a 0.204 inch inside diameter, a 1\/2 inch body outside diameter, and an overall length of 1-3\/8 inches. The inside diameter tolerance is held to +0.0001 to +0.0004 inches, which supports accurate hole location and consistent results across production runs. Machinists, toolmakers, and fixture builders are the primary installers of this component.\u003c\/p\u003e\n\u003cp\u003eThis bushing suits drill jig applications in manufacturing, metalworking, and fabrication environments. The headless design allows the bushing to sit flush within a counterbored hole, making it well suited for tight clearance situations or stacked tooling setups. The press fit installation method locks the bushing permanently into the jig plate without additional fasteners. The counterbored configuration and compliance with ANSI standards make it a direct fit for standard jig bushing applications in both light production and high-volume environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened steel construction rated 60 to 65 HRC for extended wear life in repeated drilling operations\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise hole location guidance\u003c\/li\u003e\n  \u003cli\u003eHeadless design for flush installation in counterbored jig plates\u003c\/li\u003e\n  \u003cli\u003ePress fit installation method — no additional fasteners required\u003c\/li\u003e\n  \u003cli\u003eCounterbored configuration supports standard jig bushing setups\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation component for standard ANSI press fit headless drill jig applications requiring a P-series bushing with a 0.204 inch inside diameter and 1\/2 inch outside diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are typically installed by machinists or toolmakers using an arbor press or hydraulic press. Clean and deburr the receiving bore in the jig plate before installation to ensure proper seating. Once pressed in, this bushing is not intended for removal or reuse. Verify the counterbore depth matches the bushing length before pressing to achieve a flush surface condition.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.204 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Wire Gauge\u003c\/strong\u003e: No. 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.5 inches (1\/2 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1.375 inches (1-3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P3222GF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51747083354418,"sku":"P3222GF","price":22.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_e72b6f17-68e6-4348-9634-9e4de9cf801e.jpg?v=1788875872","url":"https:\/\/voomisupply.com\/products\/boneham-p3222gf-press-fit-headless-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}