{"product_id":"boneham-p268hg-press-fit-headless-drill-bushing","title":"Boneham P268HG Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM P268HG is a press fit headless drill bushing designed to guide drill bits and reamers with precision in jig and fixture applications. This is an Industry Code P bushing with a 0.250 inch inside diameter, a 13\/32 inch body outside diameter, and a 1\/2 inch overall length. Manufactured from steel and hardened to 60 to 65 HRC, it provides the wear resistance required for repetitive drilling operations. Inside diameter tolerance is held to +0.0001 to +0.0004 inches, keeping hole location consistent across high-volume production runs. Machinists, tool and die makers, and fixture builders are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in precision drill jigs where a permanent, flush-mounted guide is required. The headless profile sits flush with or below the jig plate surface, making it appropriate for applications where a flanged head would interfere with workpiece seating or fixturing. It is a non-renewable bushing, meaning it is pressed permanently into the jig body rather than swapped out for liner-style service. Typical use is in metalworking, fabrication shops, and production environments that require consistent hole placement across multiple workpieces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation — no fasteners or retaining hardware required\u003c\/li\u003e\n  \u003cli\u003eHeadless design sits flush with jig plate surface to avoid workpiece interference\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n  \u003cli\u003eNon-renewable, permanent-mount configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style permanent press fit drill bushing conforming to ANSI standards for Industry Code P headless bushings, suitable for standard drill jig plates and fixture bodies machined to accept a 13\/32 inch outside diameter press fit bushing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or toolmakers using an arbor press or hydraulic press to seat the bushing flush into a properly sized and toleranced jig plate bore. The receiving bore should be finish-reamed to the required interference fit specification before pressing. Never drive the bushing in with an unsupported hammer strike, as this can crack or misalign the bushing. Once pressed in, this bushing is not intended for removal or field replacement.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.2500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Letter Size\u003c\/strong\u003e: E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P268HG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51731498565938,"sku":"P268HG","price":17.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_c111ded1-2116-47c9-a323-b679176c5401.jpg?v=1788731802","url":"https:\/\/voomisupply.com\/products\/boneham-p268hg-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}