{"product_id":"boneham-p2612gk-press-fit-headless-drill-bushing","title":"Boneham P2612GK Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM P2612GK is a press fit headless drill bushing designed to guide drill bits with precision in jig and fixture applications. With a 0.209 inch inside diameter, a 13\/32 inch outside diameter, and a 3\/4 inch overall length, this bushing provides accurate drill guidance while maintaining a low-profile headless design that sits flush with the jig plate surface. Constructed from steel hardened to 60 to 65 HRC, it delivers the wear resistance required for repetitive drilling operations in production and maintenance environments.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in drill jigs, fixture plates, and tooling setups where consistent hole location is critical. The press fit installation method locks the bushing securely into a prepared plate bore without fasteners. It carries an ANSI-standard industry code of P, making it a recognized fit within standard drill bushing systems. Machinists, toolmakers, and fixture builders in metalworking, manufacturing, and fabrication shops are the primary installers of this component.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method for secure, fastener-free retention in jig plates\u003c\/li\u003e\n  \u003cli\u003eHeadless design sits flush with the plate surface for clearance-sensitive applications\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eANSI-standard P industry code for compatibility within standard bushing systems\u003c\/li\u003e\n  \u003cli\u003eNon-renewable fixed bushing — intended for permanent installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard P-series press fit headless drill bushing for use in standard drill jig plates and fixture tooling requiring a 13\/32 inch bore and a 0.209 inch drill guide diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinists using an arbor press to seat the bushing flush into a precision-bored jig plate hole. The receiving bore must be machined to the correct interference fit tolerance to ensure proper retention. Once pressed in, this bushing is not designed for removal and replacement. Always verify that the plate bore diameter and depth match the bushing outside diameter and overall length before pressing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.209 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Wire Size\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P2612GK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51729644683570,"sku":"P2612GK","price":18.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_5eee6dec-68b4-4b4a-8136-0c1771daec77.jpg?v=1788707139","url":"https:\/\/voomisupply.com\/products\/boneham-p2612gk-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}