{"product_id":"boneham-p206ft-press-fit-headless-drill-bushing-steel","title":"Boneham P206FT Press Fit Headless Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM P206FT is a Type P press fit headless drill bushing machined from steel and hardened to 60 to 65 HRC. It is designed to guide drill bits and other cutting tools with precision during repetitive drilling operations on jig fixtures. The bushing measures 3\/16 inches inside diameter, 5\/16 inches outside diameter, and 3\/8 inches overall length. It is installed without a head or flange, seating flush within the jig plate. Machinists and toolmakers rely on this style of bushing where a low-profile, permanent guide insert is required and where tool alignment consistency directly affects hole location accuracy.\u003c\/p\u003e\u003cp\u003eType P press fit headless bushings are used in production drilling jigs and fixtures across metalworking, fabrication, and manufacturing environments. They are suited for applications where the bushing will remain permanently seated in the jig body and will not be exchanged during a production run. The compact outside diameter of 5\/16 inches allows placement in closely spaced hole patterns. This part is appropriate for light-duty to medium-duty drilling operations where the drill or reamer passes fully through the bushing bore.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePress fit installation method — no fasteners or locking collars required\u003c\/li\u003e\n\u003cli\u003eHeadless design seats flush with jig plate surface for low-profile clearance\u003c\/li\u003e\n\u003cli\u003eHardness of 60 to 65 HRC for extended wear resistance under repeated tool passes\u003c\/li\u003e\n\u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for close tool guidance\u003c\/li\u003e\n\u003cli\u003eSteel construction provides durability in metalworking fixture applications\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for drill bushing geometry and tolerancing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a Type P press fit headless drill bushing per ANSI standards, suitable for use in standard drill jig fixtures that accept a 5\/16 inch outside diameter bushing bore.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or toolmaker using a press or arbor press to drive the bushing into a correctly sized and toleranced receiver hole in the jig plate. The receiving bore should be machined to the appropriate interference fit tolerance before pressing the bushing into place. Pressing the bushing in crooked or forcing it into an undersized bore can damage the inside diameter tolerance. This bushing is not designed to be removed and reinstalled once seated.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P206FT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51728571662642,"sku":"P206FT","price":17.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_bcc1396a-2877-40fb-a628-1e6d2e01e866.jpg?v=1788693484","url":"https:\/\/voomisupply.com\/products\/boneham-p206ft-press-fit-headless-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}