{"product_id":"boneham-p2012fx-press-fit-headless-drill-bushing","title":"Boneham P2012FX Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM P2012FX is a press fit headless drill bushing designed to guide cutting tools with precision in jig and fixture applications. Manufactured from steel hardened to 60 to 65 HRC, this bushing delivers the wear resistance required for repeated drilling operations on production floors and in job shops. The headless profile sits flush with the jig plate surface, making it well suited for close-tolerance setups where a flanged head would interfere. With an inside diameter of 0.1935 inches, an outside diameter of 5\/16 inches, and an overall length of 3\/4 inches, it conforms to ANSI standards for industry code P bushings.\u003c\/p\u003e\u003cp\u003eThis bushing is used in drill jigs, fixture plates, and tooling assemblies where accurate hole location and repeatable guidance are required. Typical applications include production drilling of small-diameter holes in metalworking, fabrication, and machining environments. The press fit installation method creates a permanent, interference-fit installation in the jig plate, making it appropriate for high-cycle operations where the bushing is not intended to be removed between production runs. Machinists, tool and die makers, and fixture builders are the primary installers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction rated 60 to 65 HRC for long service life under repeated tooling contact\u003c\/li\u003e\n\u003cli\u003ePress fit installation for permanent, secure seating in jig plates\u003c\/li\u003e\n\u003cli\u003eHeadless design sits flush with jig surface to eliminate interference in close-clearance setups\u003c\/li\u003e\n\u003cli\u003eInside diameter tolerance of plus 0.0001 to plus 0.0004 inches ensures consistent tool guidance\u003c\/li\u003e\n\u003cli\u003eConforms to ANSI standards for industry code P drill bushings\u003c\/li\u003e\n\u003cli\u003eNon-renewable design optimized for permanent fixture installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard industry code P press fit headless drill bushing for use in jig plates and fixture tooling requiring a permanent bushing installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by machinists or tool and die makers using an arbor press or hydraulic press to drive the bushing into a precision-reamed hole in the jig plate. The mating hole in the plate must be sized to the correct interference fit for the outside diameter before pressing. Never drive the bushing with impact tools, as this can distort the bore. Verify inside diameter alignment after pressing to confirm tool guidance geometry has not shifted.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.1935 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Wire Size\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P2012FX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51736623382834,"sku":"P2012FX","price":19.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_ed2949ba-af95-4d0f-9d2b-a61b1e25b251.jpg?v=1788779022","url":"https:\/\/voomisupply.com\/products\/boneham-p2012fx-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}