{"product_id":"boneham-p166dv-press-fit-headless-drill-bushing-steel","title":"Boneham P166DV Press Fit Headless Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM P166DV is a press fit headless drill bushing used to guide drill bits and cutting tools with precision in jig and fixture applications. Manufactured from steel and hardened to 60 to 65 HRC, this bushing resists wear under repeated drilling cycles. The P industry code designates a standard headless press fit design, with a 0.125 inch inside diameter, a 0.25 inch body outside diameter, and a 0.375 inch overall length. The tight inside diameter tolerance of plus 0.0001 to plus 0.0004 inches ensures consistent hole location and repeatable accuracy. Machinists and toolmakers install this bushing into drill jig plates and fixtures on production floors and job shops.\u003c\/p\u003e\u003cp\u003eThis bushing is suited for production drilling operations where precise hole location is required. Its headless design allows flush installation into jig plates without protruding above the plate surface, making it appropriate for applications where clearance above the workpiece is limited. ANSI standards compliance makes it a direct fit for tooling designed to standard bushing specifications. The P166DV is commonly used in metalworking, fabrication, and machining environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePress fit installation method for secure, interference-fit seating in jig plates\u003c\/li\u003e\n\u003cli\u003eHeadless design allows flush mounting with no head above the jig plate surface\u003c\/li\u003e\n\u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear resistance\u003c\/li\u003e\n\u003cli\u003eInside diameter tolerance of plus 0.0001 to plus 0.0004 inches for precise tool guidance\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for interchangeability with standard drill jig tooling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard press fit headless drill bushing compatible with drill jig plates and fixtures built to P-series bushing specifications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003ePress fit bushings are installed by machinists or toolmakers using an arbor press or hydraulic press to achieve a proper interference fit in the jig plate bore. Verify the receiving bore diameter matches the bushing outside diameter tolerance before pressing. Do not drive the bushing with impact tools, as this can damage the bushing bore or distort the outer diameter. Secure all workpieces and de-energize any powered equipment before performing fixture maintenance or bushing replacement.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.125 inches (0.1250 decimal inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P166DV\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51732330610994,"sku":"P166DV","price":21.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_b06e1228-046a-4630-81ad-d7b74b2476f5.jpg?v=1788741693","url":"https:\/\/voomisupply.com\/products\/boneham-p166dv-press-fit-headless-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}