{"product_id":"boneham-p166dq-press-fit-headless-drill-bushing-steel","title":"Boneham P166DQ Press Fit Headless Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM P166DQ is a press fit headless drill bushing designed to guide drill bits and cutting tools with precision in machining and fabrication applications. Manufactured from hardened steel with a hardness rating of 60 to 65 HRC, this bushing provides consistent bore alignment and wear resistance under repeated drilling operations. The 0.116 inch inside diameter accepts a number 32 wire gauge drill, while the 1\/4 inch outside diameter body presses directly into a prepared hole in a drill jig plate without the need for a locking collar or head flange. The 3\/8 inch overall length suits standard jig plate thicknesses common in production and toolroom environments.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jig tooling for metalworking, light fabrication, and precision machining shops. It is a fixed, non-renewable bushing, meaning it is intended to remain permanently installed in the jig body once pressed in. Machinists, tool and die makers, and jig and fixture builders specify this type of bushing where a low-profile, flush installation is required and bushing replacement is not anticipated during the service life of the fixture. It conforms to ANSI standards for drill bushing geometry and tolerancing.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation — no fasteners or locking collar required\u003c\/li\u003e\n  \u003cli\u003eHeadless design sits flush with jig plate surface for low-profile clearance\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction rated 60 to 65 HRC for extended wear life\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches ensures precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eANSI-conforming geometry for interchangeability with standard drill jig components\u003c\/li\u003e\n  \u003cli\u003eNon-renewable fixed bushing — ideal for permanent jig installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation bushing for ANSI-standard drill jig fixtures requiring a headless press fit bushing with a 0.116 inch bore and 1\/4 inch outside diameter body.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or tool and die maker using an arbor press or hydraulic press to seat the bushing into a reamed hole sized to the required press fit interference. The receiving hole in the jig plate should be finish-reamed to the correct tolerance before pressing to avoid galling or cracking the bushing. Never drive the bushing in with a hammer directly on the bore face. Once pressed in, the bushing is considered permanent and is not designed for removal and reuse.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.1160 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Gauge)\u003c\/strong\u003e: Number 32\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.250 inches (1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P166DQ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51746187149618,"sku":"P166DQ","price":20.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_c609a191-aabf-4741-a811-af7064c52f58.jpg?v=1788866888","url":"https:\/\/voomisupply.com\/products\/boneham-p166dq-press-fit-headless-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}