{"product_id":"boneham-p1616dt-press-fit-headless-drill-bushing","title":"Boneham P1616DT Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM P1616DT is a press fit headless drill bushing designed to guide drill bits and cutting tools with precision in jig and fixture applications. Built to Industry Code P and conforming to ANSI standards, this bushing features a 0.12-inch inside diameter, a 1\/4-inch outside diameter, and a 1-inch overall length. The inside diameter tolerance of +0.0001 to +0.0004 inches ensures close control over tool location. Constructed from hardened steel rated at 60 to 65 HRC, the P1616DT delivers the wear resistance required for repetitive drilling operations. It is a non-renewable, fixed installation component intended for permanent press fit mounting in a drill jig plate.\u003c\/p\u003e\u003cp\u003eThis bushing is suited for production and toolroom environments where consistent hole location is critical. The headless design keeps the bushing flush with the jig plate surface, making it appropriate for applications where a protruding head would interfere with the workpiece or fixture setup. The counterbored feature accommodates specific jig plate configurations. Machinists, tool and die makers, and fixture builders typically specify this bushing when building or refurbishing drill jigs for metalworking operations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePress fit installation method for permanent, fixed positioning in jig plates\u003c\/li\u003e\n\u003cli\u003eIndustry Code P designation per ANSI standards\u003c\/li\u003e\n\u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise tool guidance\u003c\/li\u003e\n\u003cli\u003eHardened steel construction at 60 to 65 HRC for long service life under repeated use\u003c\/li\u003e\n\u003cli\u003eHeadless design keeps bushing flush with jig plate surface\u003c\/li\u003e\n\u003cli\u003eCounterbored construction for compatible fixture configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard press fit headless drill bushing for use in drill jig plates and machining fixtures requiring a permanent, non-renewable bushing in the Industry Code P series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003ePress fit bushings are installed by a machinist or toolmaker using a press or arbor press — never drive with a hammer, as this can damage the bore or distort the bushing. The receiving hole in the jig plate must be machined to the appropriate interference fit tolerance before installation. Once pressed in, this bushing is not designed for removal and reuse. Verify bore diameter and plate material compatibility before pressing to avoid cracking or galling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.1200 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Size)\u003c\/strong\u003e: #31\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P1616DT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51730555175218,"sku":"P1616DT","price":24.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_a275f8f6-2c8f-4618-8ab9-50b7e4b01639.jpg?v=1788719507","url":"https:\/\/voomisupply.com\/products\/boneham-p1616dt-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}