{"product_id":"boneham-p1316ct-press-fit-headless-drill-bushing","title":"Boneham P1316CT Press Fit Headless Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM P1316CT is a press fit headless drill bushing designed to guide drill bits with precision in metalworking and fabrication applications. Classified under Bushing Industry Code P, this bushing features a 0.0935 inch inside diameter (Wire Gauge 42), a 13\/64 inch body outside diameter, and a 1 inch overall length. Manufactured from steel with a hardness rating of 60 to 65 HRC, it delivers the wear resistance and dimensional stability required for accurate, repeatable hole location. The inside diameter tolerance of plus 0.0001 to plus 0.0004 inches ensures tight, consistent guidance for cutting tools throughout the drilling operation.\u003c\/p\u003e\u003cp\u003eThis bushing is used in drill jigs and fixture plates across machining, toolmaking, and production drilling operations. It is suited for both manual and CNC-assisted drilling setups where a headless, flush-mounted bushing is required. The counterbored design allows proper seating in a prepared jig plate. It is a non-renewable, permanent-installation bushing intended for setups where bushing replacement is not required during the service life of the fixture.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePress fit installation method for secure, permanent seating in jig plates\u003c\/li\u003e\n\u003cli\u003eHeadless design mounts flush with the jig plate surface\u003c\/li\u003e\n\u003cli\u003e0.0935 inch inside diameter with plus 0.0001 to plus 0.0004 inch tolerance for precise drill guidance\u003c\/li\u003e\n\u003cli\u003e60 to 65 HRC hardness for extended wear resistance under repeated drilling cycles\u003c\/li\u003e\n\u003cli\u003eCounterbored body for proper fixture plate engagement\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-installation component for standard ANSI-compliant drill jig fixtures requiring a press fit headless bushing with a P industry code classification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by toolmakers or machinist tradespeople using an arbor press or hydraulic press to seat the bushing into a precision-reamed hole in the jig plate. The mating hole in the fixture must be machined to the correct press fit tolerance before installation. Do not drive the bushing with a hammer, as this can damage the bore geometry or outer surface. Once pressed in, this bushing is not designed for removal and reinstallation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.0935 inches (Wire Gauge 42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P1316CT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51754926866738,"sku":"P1316CT","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_6ff3f0db-ab83-4001-bc95-b8632f59dfab.jpg?v=1788949863","url":"https:\/\/voomisupply.com\/products\/boneham-p1316ct-press-fit-headless-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}