{"product_id":"boneham-h648mh-press-fit-headed-drill-bushing-5-8-in","title":"Boneham H648MH Press Fit Headed Drill Bushing 5\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H648MH is a Type H press fit headed drill bushing machined from steel and hardened to 60 to 65 HRC. It is designed to guide drill bits, reamers, and other cutting tools with precision in jig and fixture applications. The bushing features a 5\/8 inch (0.6250 inch) inside diameter held to a tight tolerance of +0.0001 to +0.0005 inches, a 1 inch body outside diameter, and a 1\/2 inch length under the head. The head outside diameter is 1-15\/64 inches with a 5\/16 inch head height. Toolmakers, machinists, and fixture builders install this component as a permanent, non-renewable guide element.\u003c\/p\u003e\n\u003cp\u003eThe H648MH is suited for production drilling, reaming, and boring operations where consistent hole location and tool guidance are critical. Its press fit installation method makes it appropriate for fixed jig plate assemblies in manufacturing and fabrication environments, both in job shops and high-volume production settings. The headed design seats against the jig plate surface to control insertion depth and resist axial push-through under cutting forces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType H headed press fit design seats flush against the jig plate for consistent depth control\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches ensures precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for long service life under repeated tool contact\u003c\/li\u003e\n  \u003cli\u003eNon-renewable (permanent) installation — no liner bushing required\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n  \u003cli\u003e1-15\/64 inch head outside diameter and 5\/16 inch head height provide a positive seating flange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard Type H press fit headed drill bushing for use in standard jig plates and fixture assemblies where a 1 inch body outside diameter press fit hole has been prepared.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed by toolmakers or machinists using an arbor press or hydraulic press — never hammer directly on the bushing head, as this can damage the bore or distort the seating flange. The receiving hole in the jig plate should be machined to the appropriate press fit tolerance before installation. Once pressed in, this bushing is not intended for removal or replacement. Verify inside diameter and OD tolerances against your jig plate design before installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Headed Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1-15\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H648MH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51732628209970,"sku":"H648MH","price":21.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_9e97974a-a24e-4087-9643-0e61194b250b.jpg?v=1788745185","url":"https:\/\/voomisupply.com\/products\/boneham-h648mh-press-fit-headed-drill-bushing-5-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}