{"product_id":"boneham-h5612lx-press-fit-headed-drill-bushing-9-16-in","title":"Boneham H5612LX Press Fit Headed Drill Bushing 9\/16 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H5612LX is a Type H press fit headed drill bushing designed to guide cutting tools with precision in jig and fixture applications. Manufactured from steel with a hardness rating of 60 to 65 HRC, this bushing provides consistent bore alignment and resists wear during repeated drilling operations. The inside diameter measures 9\/16 inches (0.5625 inches decimal), and the body outside diameter measures 7\/8 inches. The headed design seats against the jig plate surface, providing positive axial location without additional fasteners. This component is intended for permanent installation in drill jigs and is not renewable once pressed into place.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in metalworking and fabrication environments where accurate hole location is required across production runs. It fits into a prepared counterbored hole in a drill jig plate and is pressed flush or to shoulder. Typical installers include tool and die makers, machinists, and fixture builders working in job shops or production facilities. The Type H designation conforms to ANSI industry standards for headed press fit bushings, making it a direct replacement in fixtures already designed to that specification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eInside diameter of 9\/16 inches (0.5625 inches) with a tight tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eBody outside diameter of 7\/8 inches with a head outside diameter of 1-7\/64 inches\u003c\/li\u003e\n  \u003cli\u003eLength under head of 3\/4 inches suits standard jig plate thicknesses\u003c\/li\u003e\n  \u003cli\u003eHead height of 1\/4 inch provides positive seating against the jig plate surface\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60-65 HRC for extended service life under repeated drilling cycles\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI standards for Type H headed press fit bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a permanent press fit installation in drill jigs and fixtures requiring a Type H headed bushing with a 9\/16 inch bore, conforming to ANSI bushing standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation requires a precision-machined receiver hole sized to accept the 7\/8 inch outside diameter with the appropriate press fit interference. A hydraulic or arbor press should be used to seat the bushing squarely without damaging the bore. Because this is a non-renewable bushing, removal will typically damage the component or the jig plate. Verify bore alignment and jig plate thickness before pressing to final position.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 9\/16 inches (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1-7\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Headed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H5612LX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51752289075506,"sku":"H5612LX","price":23.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_5ed33e93-fb89-4af5-b4a1-9655bddcaec2.jpg?v=1788927221","url":"https:\/\/voomisupply.com\/products\/boneham-h5612lx-press-fit-headed-drill-bushing-9-16-in","provider":"Voomi Supply","version":"1.0","type":"link"}