{"product_id":"boneham-h4812jq-press-fit-headed-drill-bushing-type-h","title":"Boneham H4812JQ Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM H4812JQ is a Type H press fit headed drill bushing designed to guide cutting tools accurately during drilling, reaming, and boring operations. Machined from steel and hardened to 60 to 65 HRC, this bushing resists wear under high-cycle production conditions. The headed design seats against the jig plate surface to control insertion depth without additional fasteners. The inside diameter of 0.375 inches is held to a close tolerance of +0.0001 to +0.0005 inches, ensuring repeatable tool guidance across the life of the bushing. It installs by press fit and does not require additional locking hardware. Machinists, tool and die makers, and jig fixture builders are the primary installers.\u003c\/p\u003e\u003cp\u003eThis bushing is suited for use in drill jigs and fixture plates where a permanent, non-renewable bushing is required. The 3\/4-inch body outside diameter and 3\/4-inch length under head make it appropriate for standard jig plate thicknesses common in production machining environments. The head outside diameter measures 59\/64 inches with a head height of 7\/32 inches. Its steel construction and ANSI-standard dimensions allow it to be used as a direct replacement in existing fixtures designed to the H bushing industry code.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePress fit installation — no locking collar or set screw required\u003c\/li\u003e\n\u003cli\u003eInside diameter of 0.375 inches with tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n\u003cli\u003eHardened steel construction at 60 to 65 HRC for wear resistance in high-cycle applications\u003c\/li\u003e\n\u003cli\u003eHeaded design controls seating depth against the jig plate face\u003c\/li\u003e\n\u003cli\u003eANSI-standard dimensions for compatibility with industry-standard jig designs\u003c\/li\u003e\n\u003cli\u003eNon-renewable (permanent) installation type for stable, long-service fixture applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard Type H press fit headed drill bushing for use in production drill jigs and machined fixture plates requiring a permanent bushing with a 3\/8-inch inside diameter and 3\/4-inch body outside diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or tool and die maker using a press to seat the bushing into a prepared jig plate bore. The receiving bore must be machined to the appropriate press fit tolerance before installation. Power down and secure all equipment before pressing the bushing into the fixture. Once installed, this bushing is not intended to be removed and replaced — select a renewable bushing type if serviceability is required.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 59\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead or Headless\u003c\/strong\u003e: Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H4812JQ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51746417770802,"sku":"H4812JQ","price":21.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_662f08c8-20ce-4530-81c7-d5e2e25c06a4.jpg?v=1788869843","url":"https:\/\/voomisupply.com\/products\/boneham-h4812jq-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}