{"product_id":"boneham-h408ir-press-fit-headed-drill-bushing-steel","title":"Boneham H408IR Press Fit Headed Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM H408IR is a Type H press fit headed drill bushing machined from steel and hardened to 60 to 65 HRC. It is designed to guide twist drills and reamers with precision in jig and fixture applications. The bushing presses directly into a drill jig plate without a locking collar, making it a permanent installation. The inside diameter is 0.323 inches with a tolerance of plus 0.0001 to plus 0.0005 inches, providing consistent hole location accuracy. The body outside diameter is 5\/8 inch and the length under the head is 1\/2 inch. Machinists, tool and die makers, and fixture builders install this bushing in production drilling setups requiring repeatable accuracy.\u003c\/p\u003e\u003cp\u003eThis bushing is suited for use in drill jigs on production floors, machine shops, and precision fabrication environments. The headed design seats flush against the jig plate surface, resisting axial push-through during drilling operations. The press fit installation method is appropriate for permanent fixture applications where the bushing does not need to be removed or replaced between operations. It conforms to ANSI standards and is sold individually.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType H headed press fit design seats against jig plate surface to resist axial movement\u003c\/li\u003e\n\u003cli\u003eInside diameter of 0.323 inches (Letter P) with tight tolerance of plus 0.0001 to plus 0.0005 inches\u003c\/li\u003e\n\u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life in high-cycle drilling applications\u003c\/li\u003e\n\u003cli\u003eHead outside diameter of 51\/64 inch and head height of 7\/32 inch for positive seating\u003c\/li\u003e\n\u003cli\u003eConforms to ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n\u003cli\u003eNon-renewable design intended for permanent press fit installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style permanent press fit drill bushing for use in standard ANSI-dimensioned drill jig plates requiring a Type H headed bushing configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by pressing the bushing into a precision-bored hole in the jig plate using an arbor press or hydraulic press. The jig plate bore should be machined to the recommended interference fit tolerance for the body outside diameter before installation. Pressing the bushing in at an angle can damage the bore or distort the inside diameter, so alignment should be verified before applying force. Once installed, this bushing is not intended for removal and replacement.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Headed Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.323 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter)\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 51\/64 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 7\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H408IR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51731978387762,"sku":"H408IR","price":18.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_cd11a68c-eb5e-4965-9aff-06b1368addb5.jpg?v=1788737525","url":"https:\/\/voomisupply.com\/products\/boneham-h408ir-press-fit-headed-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}