{"product_id":"boneham-h4028kg-press-fit-headed-drill-bushing-type-h","title":"Boneham H4028KG Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H4028KG is a Type H press fit headed drill bushing machined from steel with a hardness rating of 60 to 65 HRC. It features a 13\/32-inch inside diameter, a 5\/8-inch body outside diameter, and a 1-3\/4-inch length under the head. The head outside diameter measures 51\/64 inch with a 7\/32-inch head height. Press fit installation locks the bushing permanently into a jig plate without a locking mechanism. This bushing guides twist drills, reamers, and other cutting tools to maintain accurate hole location and alignment in production drilling applications. Machinists, tool-and-die makers, and fixture builders install this type of component in drill jig assemblies.\u003c\/p\u003e\n\u003cp\u003eType H headed drill bushings are used in fixed drill jig applications where the bushing is not intended to be removed or replaced during normal service. The head bears against the jig plate surface, controlling insertion depth and preventing the bushing from being pushed through the plate under axial cutting loads. This bushing is suited for production runs on metal, plastic, and composite workpieces where consistent hole location is required across multiple parts. It is a non-renewable design, meaning it is pressed permanently into the jig and is not field-swappable without pressing out and replacing the bushing.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation for permanent, rigid seating in drill jig plates\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003e60 to 65 HRC hardness resists wear from repeated drill passes\u003c\/li\u003e\n  \u003cli\u003eHead design controls insertion depth and resists axial push-through forces\u003c\/li\u003e\n  \u003cli\u003eNon-renewable, non-counterbored design for fixed jig applications\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for headed drill bushing geometry and tolerancing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style fixed bushing for Type H drill jig applications conforming to ANSI standards for headed press fit drill bushings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eA licensed machinist or toolmaker should press this bushing into a properly sized and finished jig plate bore using an arbor press or hydraulic press. The receiving bore must be machined to the tolerance required for a press fit to ensure the bushing seats without rotation or axial movement. Do not drive the bushing with a hammer directly on the head, as this can damage the bore alignment. Once pressed in, the bushing is considered permanent and should not be removed and reinstalled, as this may compromise fit and alignment.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H (Headed Press Fit)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 51\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H4028KG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51749725077810,"sku":"H4028KG","price":27.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_cd21a23c-9bf4-45cd-8493-3c7ce865736f.jpg?v=1788909615","url":"https:\/\/voomisupply.com\/products\/boneham-h4028kg-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}