{"product_id":"boneham-h326go-press-fit-headed-drill-bushing-7-32-id","title":"Boneham H326GO Press Fit Headed Drill Bushing 7\/32 Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM H326GO is a Type H press fit headed drill bushing designed to guide cutting tools with precision in jig and fixture applications. Machined from steel and hardened to 60 to 65 HRC, this bushing maintains accurate hole location under repeated drilling cycles. The headed design provides a positive stop against the jig plate surface, preventing axial migration during tool engagement. With a 7\/32 inch inside diameter and a 1\/2 inch body outside diameter, it fits standard jig plate bores and accepts common drill bit shanks. Machinists, tool and die makers, and production fixture builders rely on this class of bushing for consistent part-to-part hole accuracy in metal fabrication and assembly operations.\u003c\/p\u003e\u003cp\u003eThe H326GO is suited for use in drill jigs, welding fixtures, and production tooling plates where a permanent, non-renewable bushing is required. The press fit installation method locks the bushing permanently into the jig plate without mechanical fasteners. The 3\/8 inch length under head provides adequate tool guidance depth for standard drilling operations. This part is appropriate for both prototype tooling and high-volume production fixtures across metalworking and manufacturing environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType H headed design provides a positive stop flush against the jig plate face\u003c\/li\u003e\n\u003cli\u003eSteel construction hardened to 60 to 65 HRC for wear resistance under repeated tool contact\u003c\/li\u003e\n\u003cli\u003ePress fit installation method creates a permanent, secure mount without additional hardware\u003c\/li\u003e\n\u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches ensures close tool guidance\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for drill bushing dimensional conformance\u003c\/li\u003e\n\u003cli\u003eNon-renewable (fixed) design suited for permanent fixture installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an ANSI-standard Type H press fit headed drill bushing for use in jig plates and fixture bodies bored to accept a 1\/2 inch outside diameter press fit bushing.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by pressing the bushing into a precision-bored hole in the jig plate using an arbor press or hydraulic press — never drive with a hammer directly on the head. Verify bore diameter and surface finish before pressing to avoid galling or bushing distortion. Ensure the jig plate is securely supported to prevent deflection during press-in. Because this is a permanent press fit bushing, removal will damage the bushing and likely the host bore, so confirm placement before pressing.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Headed Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 39\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H326GO\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51754156032306,"sku":"H326GO","price":20.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_438503e8-5404-4f69-83f6-d353b97782ba.jpg?v=1788943656","url":"https:\/\/voomisupply.com\/products\/boneham-h326go-press-fit-headed-drill-bushing-7-32-id","provider":"Voomi Supply","version":"1.0","type":"link"}