{"product_id":"boneham-h3222ih-press-fit-headed-drill-bushing-type-h","title":"Boneham H3222IH Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H3222IH is a Type H press fit headed drill bushing manufactured from hardened steel for use in jig and fixture drilling applications. It features a 0.302 inch inside diameter, a 1\/2 inch body outside diameter, and a 1-3\/8 inch length under head. The bushing presses directly into a jig plate without requiring a locking mechanism, making it a fixed, non-renewable installation. With a hardness rating of 60 to 65 HRC, the bore maintains tight tolerances and resists wear through repeated drilling cycles. Machinists, toolmakers, and fixture builders use this bushing to guide drill bits and reamers accurately and repeatably.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in production drilling jigs, fixture plates, and tooling setups where a permanent, non-removable guide is acceptable. The headed design seats flush against the jig plate surface to control drill entry depth and prevent the bushing from being driven through the plate during operation. The counterbored configuration accommodates specific seating requirements in the fixture body. Typical installers include tool and die makers and precision machining professionals working in manufacturing and metal fabrication environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation — no locking collar or liner bushing required\u003c\/li\u003e\n  \u003cli\u003eType H headed design seats against jig plate surface for consistent drill entry\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of plus 0.0001 to plus 0.0005 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eHardness of 60 to 65 HRC for extended wear resistance in high-cycle drilling\u003c\/li\u003e\n  \u003cli\u003eCounterbored body for proper seating in compatible fixture plates\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a permanent press fit replacement or new-installation drill bushing for jig plates and fixtures requiring a Type H headed bushing with a 0.302 inch bore and 1\/2 inch body outside diameter per ANSI standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolmaker using an arbor press or hydraulic press to seat the bushing into a prepared hole in the jig plate. The receiving hole must be machined to the correct interference fit tolerance before pressing to avoid bore distortion or bushing damage. Because this is a non-renewable bushing, removal typically damages the bushing or the plate — confirm fixture design before pressing. Always de-energize and lock out any associated equipment before servicing tooling or fixture components.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.302 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter)\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 39\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 7\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H (Headed)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H3222IH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51754489577778,"sku":"H3222IH","price":25.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_ca50a6fe-048f-4e0a-b16a-1e5925558e9a.jpg?v=1788945936","url":"https:\/\/voomisupply.com\/products\/boneham-h3222ih-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}