{"product_id":"boneham-h266go-press-fit-headed-drill-bushing-7-32-id","title":"Boneham H266GO Press Fit Headed Drill Bushing 7\/32 Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM H266GO is a Type H press fit headed drill bushing manufactured from hardened steel for precision hole-location guidance in drill jigs and fixture applications. With a 7\/32 inch inside diameter and a 13\/32 inch body outside diameter, this bushing provides a controlled, repeatable drill path for production and toolroom work. The inside diameter is held to a tight tolerance of +0.0001 to +0.0004 inches, ensuring consistent bit alignment across repeated operations. Hardness is rated at 60 to 65 HRC, giving the bushing excellent wear resistance under continuous drilling cycles. Installation is by press fit, requiring no additional locking hardware.\u003c\/p\u003e\u003cp\u003eThis bushing is suited for use in metal fabrication shops, toolrooms, and manufacturing environments where drill jig accuracy is critical. The headed design provides a positive stop against the jig plate, controlling the installed depth of the bushing. With a 3\/8 inch length under the head and a 1\/2 inch head outside diameter, it fits standard jig plate thicknesses common in precision machining setups. It is typically installed by toolmakers or fixture builders working to ANSI standards.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType H press fit installation — no locking ring or liner required\u003c\/li\u003e\n\u003cli\u003eInside diameter: 7\/32 inch with tolerance of +0.0001 to +0.0004 inches for tight bit guidance\u003c\/li\u003e\n\u003cli\u003eHardness: 60 to 65 HRC for high wear resistance in repetitive drilling applications\u003c\/li\u003e\n\u003cli\u003eHeaded design controls installed depth against the jig plate surface\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n\u003cli\u003eNot renewable — designed as a permanent press fit installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or new installation for ANSI Type H press fit headed drill bushing applications requiring a 7\/32 inch inside diameter and 13\/32 inch body outside diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003ePress fit bushings are installed by toolmakers or machinist-trained personnel using an arbor press or hydraulic press — never drive with a hammer, as uneven force will damage the bushing bore or jig plate. Verify the jig plate bore diameter matches the bushing outside diameter tolerance before pressing to avoid galling or undersized fit. Once installed, press fit bushings are considered permanent and are not intended for removal and reuse.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H266GO\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51737689653554,"sku":"H266GO","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_9a6f581f-8187-4741-b05b-10f650b5cc58.jpg?v=1788792359","url":"https:\/\/voomisupply.com\/products\/boneham-h266go-press-fit-headed-drill-bushing-7-32-id","provider":"Voomi Supply","version":"1.0","type":"link"}