{"product_id":"boneham-h265gk-press-fit-headed-drill-bushing-type-h","title":"Boneham H265GK Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H265GK is a Type H press fit headed drill bushing manufactured from hardened steel to guide drill bits with precision in jig and fixture applications. It features an inside diameter of 0.209 inches, a body outside diameter of 13\/32 inches, and a length under head of 5\/16 inches. The hardness rating of 60 to 65 HRC ensures the bore resists wear through repeated use. This bushing is a non-renewable, permanently installed component pressed directly into a drill jig plate. Machinists and toolmakers install this type of bushing in production environments where consistent hole location is critical.\u003c\/p\u003e\n\u003cp\u003eType H headed drill bushings are used in drill jig fixtures for metalworking and machining operations across light manufacturing and precision tooling shops. The head provides a positive stop against the jig plate surface, controlling the bushing depth and preventing it from being pushed through during press-fit installation. The 1\/2 inch head outside diameter and 5\/32 inch head height are standard dimensions that align with common jig plate configurations. This part is suited to both short-run prototype fixtures and high-volume production jigs where repeatable hole guidance is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method — no set screws or locking collars required\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction rated 60 to 65 HRC for extended wear life\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eHeaded design provides positive seating against jig plate surface\u003c\/li\u003e\n  \u003cli\u003eANSI-standard dimensions for compatibility with standard jig plate layouts\u003c\/li\u003e\n  \u003cli\u003eNon-renewable design for permanent press fit installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a permanent press fit replacement or new installation component for Type H headed drill bushing applications conforming to ANSI standards. Fits standard drill jig plates machined to accept a 13\/32 inch body outside diameter bushing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or toolmakers using an arbor press or hydraulic press to seat the bushing flush into a precision-bored jig plate hole. The jig plate bore should be machined to the appropriate interference fit tolerance before pressing in the bushing. Because this is a non-renewable bushing, removal will damage the component and potentially the jig plate. Always ensure the bushing bore is free of chips or debris before drilling operations begin.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Press Fit Headed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.209 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Wire Gauge\u003c\/strong\u003e: Number 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H265GK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51749122048306,"sku":"H265GK","price":18.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_b748bfc7-f836-4863-bf72-e81fd051af7d.jpg?v=1788902318","url":"https:\/\/voomisupply.com\/products\/boneham-h265gk-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}