{"product_id":"boneham-h265gf-press-fit-headed-drill-bushing-type-h","title":"Boneham H265GF Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H265GF is a Type H press fit headed drill bushing designed to guide cutting tools with precision in jig and fixture applications. It features a 0.204 inch inside diameter, a 13\/32 inch body outside diameter, and a 5\/16 inch length under the head. Constructed from steel hardened to 60 to 65 HRC, this bushing resists wear and maintains dimensional integrity under repeated drilling cycles. The inside diameter tolerance of +0.0001 to +0.0004 inches ensures consistent tool guidance and repeatable hole location. It is installed permanently by press fit and is not designed to be renewed or replaced in the field.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs, fixture plates, and tooling setups where accurate hole placement is required across production runs. The headed design seats against the top surface of the jig plate, providing a positive stop and preventing migration under load. Typical applications include metalworking, fabrication, and precision machining environments where jig bushing standards must be maintained. With a 1\/2 inch head outside diameter and a 5\/32 inch head height, the bushing fits standard counterbored or surface-mount jig plate configurations. It is suited for both light and medium-duty drilling operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation for permanent, non-renewable mounting in jig plates\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for wear resistance\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for accurate tool guidance\u003c\/li\u003e\n  \u003cli\u003eHeaded design with 1\/2 inch head OD provides positive seating against jig plate surface\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and performance\u003c\/li\u003e\n  \u003cli\u003eCompact 5\/16 inch length under head suits thin to medium jig plate thicknesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation press fit headed drill bushing conforming to ANSI Type H standards, compatible with jig plates and fixture bodies machined to accept a 13\/32 inch body outside diameter press fit bushing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit drill bushings are typically installed by a machinist or tooling technician using an arbor press or hydraulic press. The receiving bore in the jig plate must be machined to the correct interference fit tolerance before installation. Attempting to drive the bushing in with a hammer or mallet risks cracking the bushing or damaging the bore. Do not attempt to remove and reinstall this bushing, as it is a permanent, non-renewable design.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H (Headed Press Fit)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.204 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Wire Size\u003c\/strong\u003e: No. 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H265GF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51736641962290,"sku":"H265GF","price":18.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_e27d1357-f9da-4112-8793-8c78778cd6cb.jpg?v=1788779137","url":"https:\/\/voomisupply.com\/products\/boneham-h265gf-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}