{"product_id":"boneham-h2622hd-press-fit-headed-drill-bushing-steel","title":"Boneham H2622HD Press Fit Headed Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H2622HD is a Type H press fit headed drill bushing used to guide cutting tools with precision in jig and fixture applications. Machined from steel, it features an inside diameter of 0.246 inches with a tolerance of +0.0001 to +0.0004 inches, ensuring accurate, repeatable hole location across production runs. The bushing installs without fasteners by pressing directly into a counterbored hole in a drill jig plate. With a body outside diameter of 13\/32 inches and a length under the head of 1-3\/8 inches, it suits medium-depth jig plates common in metalworking and fabrication shops. Machinists, tool and die makers, and manufacturing technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in drill jigs where a permanent, non-renewable bushing is required. The headed design seats flush against the jig plate surface via the counterbored seat, providing a positive stop that maintains consistent tool depth. It is a fixed installation intended for dedicated single-operation jigs in both low- and high-volume production environments. The press fit retention method makes it appropriate where bushing removal and replacement are not anticipated during the service life of the fixture.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType H headed design with counterbored seating for positive axial location\u003c\/li\u003e\n  \u003cli\u003ePress fit installation — no fasteners or locking devices required\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for consistent tool guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in repetitive drilling operations\u003c\/li\u003e\n  \u003cli\u003eNon-renewable fixed bushing suitable for dedicated single-operation jigs\u003c\/li\u003e\n  \u003cli\u003eHead outside diameter of 1\/2 inch and head height of 5\/32 inch for standard counterbore fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a permanent OEM-style press fit drill bushing for use in steel or cast-iron jig plates with counterbored holes sized to accept a 13\/32 inch body outside diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or tool and die makers using an arbor press or hydraulic press to seat the bushing into a properly prepared counterbored hole. The jig plate should be secured and the bushing driven squarely to prevent cocking or galling of the bore. Because this is a permanent press fit bushing, removal will likely damage the part and possibly the jig plate — plan fixture design accordingly before pressing. Verify the counterbore depth matches the head height to achieve flush seating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: H (Press Fit Headed)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.246 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter)\u003c\/strong\u003e: D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H2622HD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51728609607986,"sku":"H2622HD","price":24.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9af6fc6e3816505322fc3dc65141592c.jpg?v=1788693924","url":"https:\/\/voomisupply.com\/products\/boneham-h2622hd-press-fit-headed-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}