{"product_id":"boneham-h2622go-press-fit-headed-drill-bushing-type-h","title":"Boneham H2622GO Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H2622GO is a press fit headed drill bushing conforming to Type H industry standards. It is designed to guide drill bits and boring tools with precision during metal fabrication, jig drilling, and fixture work. The bushing features a 7\/32 inch inside diameter and a 13\/32 inch body outside diameter, with a 1-3\/8 inch length under the head. Manufactured from steel hardened to 60 to 65 HRC, it delivers the wear resistance required for repetitive production drilling. The headed design and press fit installation method provide a secure, permanent fit in drill jigs and tooling plates. Machinists, tool and die makers, and manufacturing technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in production drilling jigs, locating fixtures, and precision tooling assemblies found in metalworking shops and manufacturing environments. The counterbored head design allows it to seat flush or recessed within a jig plate. It is appropriate for applications where a permanent, non-renewable bushing solution is specified and where inside diameter tolerance control of +0.0001 to +0.0004 inches is required for accurate hole location.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation for a permanent, fixed mount in drill jig plates\u003c\/li\u003e\n  \u003cli\u003eType H headed design with a 1\/2 inch head outside diameter and 5\/32 inch head height\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for long service life in repetitive drilling\u003c\/li\u003e\n  \u003cli\u003eCounterbored head allows flush or recessed seating in tooling plates\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation component for Type H press fit headed drill bushing applications conforming to ANSI standards in standard drill jig and fixture assemblies.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed by a machinist or tool and die maker using an arbor press or hydraulic press — never a hammer strike directly on the bushing head. The receiving hole in the jig plate must be machined to the proper interference fit tolerance before installation. Once pressed in, this bushing is not designed for removal or replacement. Verify inside diameter and body outside diameter against jig plate specifications before pressing to avoid damage to the tooling plate.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Press Fit Headed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H2622GO\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51731948798258,"sku":"H2622GO","price":24.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_a36abe7a-aafa-45ba-bd5b-911bb5c02f0e.jpg?v=1788737092","url":"https:\/\/voomisupply.com\/products\/boneham-h2622go-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}