{"product_id":"boneham-h2616gh-press-fit-headed-drill-bushing-type-h","title":"Boneham H2616GH Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H2616GH is a Type H press fit headed drill bushing designed to guide cutting tools with precision in jig and fixture applications. It features an inside diameter of 0.2055 inches, a body outside diameter of 13\/32 inches, and a 1-inch length under the head. Constructed from steel, this bushing is pressed directly into a jig plate without requiring a liner bushing, making it well suited for fixed-location drilling operations where the same hole is drilled repeatedly. Machinists and toolmakers install this component in production and prototype fixtures to maintain accurate hole placement and consistent tool guidance.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs and fixture plates in manufacturing, metalworking, and toolroom environments. It is appropriate for applications where a permanent, non-renewable bushing installation is acceptable. The counterbored head design allows the bushing to seat flush against or slightly above the jig surface, depending on fixture design. The headed configuration resists axial pullout during drilling operations, providing a stable and repeatable guide for drill bits and reamers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation — no liner bushing required for direct plate mounting\u003c\/li\u003e\n  \u003cli\u003eInside diameter of 0.2055 inches with a close tolerance of +0.0001 to +0.0004 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction provides durability and wear resistance in production drilling applications\u003c\/li\u003e\n  \u003cli\u003eHead outside diameter of 1\/2 inch and head height of 5\/32 inch for positive seating against the jig plate\u003c\/li\u003e\n  \u003cli\u003eCounterbored design accommodates standard fixture plate configurations\u003c\/li\u003e\n  \u003cli\u003eNon-renewable (permanent) style for fixed-location bushing installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit permanent press fit bushing for drill jigs and fixture plates requiring a Type H headed bushing with a 0.2055-inch inside diameter and 13\/32-inch body outside diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinists using an arbor press to drive the bushing into a prepared, reamed hole in the jig plate. The receiving hole in the fixture plate must be machined to the appropriate press fit tolerance to ensure proper retention. Do not use a hammer directly on the bushing head, as this can damage the seating surface or alter dimensional accuracy. Because this is a non-renewable bushing, the plate bore must be reworked or replaced if the bushing requires removal.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H (Headed, Press Fit)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.2055 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Wire Size\u003c\/strong\u003e: #5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H2616GH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51745304052018,"sku":"H2616GH","price":23.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b617461c6c05368cdcf2b33f32fca5ff_4e72c0ba-65e0-45c4-b746-e14f726da00f.jpg?v=1788863546","url":"https:\/\/voomisupply.com\/products\/boneham-h2616gh-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}