{"product_id":"boneham-h208eq-press-fit-headed-drill-bushing","title":"Boneham H208EQ Press Fit Headed Drill Bushing","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H208EQ is a Type H press fit headed drill bushing designed to guide drill bits and other cutting tools with precision in jig and fixture applications. Machined from steel, this bushing installs without fasteners — press fit directly into the jig plate. The inside diameter measures 0.152 inches (wire size 24), the body outside diameter is 5\/16 inches, and the length under the head is 1\/2 inch. The head outside diameter is 27\/64 inches with a head height of 1\/8 inch. Machinists, toolmakers, and fixture builders install this type of bushing when a permanent, non-renewable guide is required.\u003c\/p\u003e\n\u003cp\u003eType H headed drill bushings are used in production drilling, reaming, and tapping fixtures where the bushing must be permanently retained in the jig plate. The head seats flush against the top surface of the plate to prevent the bushing from being pushed through under cutting forces. This bushing is well suited for light-duty to medium-duty production fixtures in machine shops, fabrication environments, and toolroom applications where consistent hole location is critical.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation — no locking collar or fasteners required\u003c\/li\u003e\n  \u003cli\u003eHeaded (Type H) design seats against jig plate surface to resist axial push-through\u003c\/li\u003e\n  \u003cli\u003eInside diameter: 0.152 inches (wire size 24) with tolerance of +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003eBody outside diameter: 5\/16 inches; head outside diameter: 27\/64 inches\u003c\/li\u003e\n  \u003cli\u003eLength under head: 1\/2 inch; head height: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in repeated drilling cycles\u003c\/li\u003e\n  \u003cli\u003eNon-renewable (permanent) bushing — not intended for field replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a permanent press fit replacement or new-installation headed drill bushing for standard jig plates and fixtures requiring a 5\/16-inch body bore and a 0.152-inch drill guide ID.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed by toolmakers or machinist personnel using an arbor press or hydraulic press — never drive with a hammer directly on the head, as this can damage the seating surface or distort the ID. The receiving bore in the jig plate must be machined to the appropriate interference fit tolerance before installation. Once pressed in, this bushing is not designed for removal or reuse. Verify inside diameter tolerance requirements against the cutting tool shank before pressing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.1520 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Size)\u003c\/strong\u003e: 24\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 27\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead or Headless\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H208EQ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51738962297138,"sku":"H208EQ","price":21.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/191ad5627e5b5c6a57aa4dea722f9b92.jpg?v=1788807333","url":"https:\/\/voomisupply.com\/products\/boneham-h208eq-press-fit-headed-drill-bushing","provider":"Voomi Supply","version":"1.0","type":"link"}