{"product_id":"boneham-h205ef-press-fit-headed-drill-bushing-steel","title":"Boneham H205EF Press Fit Headed Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H205EF is a Type H press fit headed drill bushing manufactured from steel for use in jig and fixture applications. It features an inside diameter of 0.1405 inches, sized to accept a No. 28 wire gauge drill bit, with a body outside diameter of 5\/16 inch and a length under the head of 5\/16 inch. The head outside diameter measures 27\/64 inch with a head height of 1\/8 inch. This is a permanent, non-renewable bushing installed by press fitting directly into a drill jig plate. Machinists and toolmakers install this type of bushing to guide cutting tools with repeatable accuracy across production runs.\u003c\/p\u003e\n\u003cp\u003eType H headed drill bushings are used in metal fabrication, machining, and tooling shops where a positive stop against the jig plate is required. The head bears against the surface of the jig, preventing the bushing from being pushed through during drilling operations. This bushing is suited to light-to-medium duty jig plate setups in both job shop and production environments. It is a single-piece, non-renewable design intended for applications where the bushing location is fixed and the bushing will not require replacement during the life of the fixture.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType H press fit design for permanent installation in drill jig plates\u003c\/li\u003e\n  \u003cli\u003eInside diameter of 0.1405 inches with a tolerance of +0.0001 to +0.0004 inches for close drill guidance\u003c\/li\u003e\n  \u003cli\u003eAccepts No. 28 wire gauge drill bit\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in production drilling applications\u003c\/li\u003e\n  \u003cli\u003eHeaded design provides a positive stop flush against the jig plate surface\u003c\/li\u003e\n  \u003cli\u003eNon-renewable bushing — designed for fixed, permanent fixture installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation drill bushing for standard jig plates accepting a 5\/16 inch body outside diameter press fit headed bushing of Type H configuration.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed by machinists or toolmakers using an arbor press or hydraulic press to seat the bushing flush into a precision-bored hole in the jig plate. Power down all machinery and secure the workpiece before pressing the bushing into position. Do not use impact tools to drive the bushing, as this can distort the bore or crack the jig plate. Verify the receiving hole diameter matches the bushing body outside diameter tolerance prior to installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Press Fit Headed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.1405 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Gauge)\u003c\/strong\u003e: No. 28\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 5\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 27\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead or Headless\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H205EF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51730925125938,"sku":"H205EF","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b617461c6c05368cdcf2b33f32fca5ff_ec57538a-fb91-4637-8919-ae28bfe230a6.jpg?v=1788724877","url":"https:\/\/voomisupply.com\/products\/boneham-h205ef-press-fit-headed-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}