{"product_id":"boneham-h1316da-press-fit-headed-drill-bushing-type-h","title":"Boneham H1316DA Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H1316DA is a Type H press fit headed drill bushing manufactured from steel for use in precision drilling and boring operations. It features an inside diameter of 0.0995 inches with a tolerance of +0.0001 to +0.0004 inches, a body outside diameter of 13\/64 inches, and a length under head of 1 inch. The head outside diameter measures 19\/64 inches and the head height is 3\/32 inches. Hardness is rated at 60 to 65 HRC, providing the wear resistance required for repetitive guided-drill applications. This bushing is installed permanently into a drill jig plate using a press fit and is not renewable. It is handled by machinists, tool-and-die makers, and precision fabrication professionals.\u003c\/p\u003e\n\u003cp\u003eType H headed drill bushings are used in drill jig fixtures where a permanent, press-fit installation is required. The counterbored head design seats flush or recessed in the jig plate, keeping the bushing face aligned with the work surface. This part is appropriate for small-diameter drill guidance in light-to-medium production environments, including job shops, manufacturing facilities, and maintenance operations requiring repeatable hole location. The ANSI-standard dimensioning ensures compatibility with standard jig tooling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType H headed press fit design for permanent installation in drill jig plates\u003c\/li\u003e\n  \u003cli\u003eInside diameter of 0.0995 inches with tight tolerance of +0.0001 to +0.0004 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eHardness of 60 to 65 HRC for long service life in repetitive drilling applications\u003c\/li\u003e\n  \u003cli\u003eCounterbored head seats securely in jig plate for stable, flush alignment\u003c\/li\u003e\n  \u003cli\u003eANSI-compliant dimensions for use with standard drill jig tooling\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability under continuous metal-cutting conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard Type H press fit headed drill bushing for use in drill jig fixtures requiring permanent bushing installation with small-diameter drill guidance.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed using an arbor press or hydraulic press; do not drive with a hammer, as this can damage the bushing bore or jig plate. Ensure the jig plate hole is machined to the correct press fit tolerance before installation. This bushing is not renewable and must be replaced along with the jig plate bore if removal is necessary. Installation is typically performed by machinists or toolmakers during jig and fixture fabrication or repair.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Press Fit Headed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.0995 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Gauge)\u003c\/strong\u003e: 39\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 19\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 3\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H1316DA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51750485524786,"sku":"H1316DA","price":33.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_8495cae4-210a-46e4-939e-e02e9ac5bace.jpg?v=1788915804","url":"https:\/\/voomisupply.com\/products\/boneham-h1316da-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}