{"product_id":"boneham-h1316bw-press-fit-headed-drill-bushing-type-h","title":"Boneham H1316BW Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H1316BW is a Type H press fit headed drill bushing designed to guide cutting tools with precision in jig and fixture applications. Manufactured from hardened steel with a Rockwell hardness rating of 60 to 65 HRC, this bushing delivers consistent bore alignment and long service life under repeated drilling cycles. The inside diameter is 0.067 inches (wire gauge number 51) with an inside diameter tolerance of +0.0001 to +0.0004 inches, making it suitable for close-tolerance work. The counterbored head design allows flush or near-flush seating in the jig plate. Licensed machinists, toolmakers, and precision fabricators specify this bushing for production drilling setups where positional accuracy is critical.\u003c\/p\u003e\n\u003cp\u003eThe H1316BW is used in drill jigs for metalworking, aerospace, automotive, and general precision manufacturing applications. It installs directly into a prepared hole in a jig plate via press fit, requiring no additional locking hardware. The headed design provides a positive stop against the jig plate surface, controlling the bushing depth automatically during installation. This bushing conforms to ANSI standards and is sized for single-use press-fit service rather than renewable replacement cycles.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType H press fit installation — no locking collar or set screw required\u003c\/li\u003e\n  \u003cli\u003eInside diameter of 0.067 inches (wire size number 51) with tight tolerance of +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction at 60 to 65 HRC for abrasion resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003eCounterbored head allows flush seating against jig plate surface\u003c\/li\u003e\n  \u003cli\u003e1 inch length under head accommodates standard jig plate thicknesses\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard Type H press fit headed drill bushing for use in machined drill jigs requiring a permanent, non-renewable bushing with a 0.067 inch bore diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinists using an arbor press or hydraulic press to drive the bushing into a reamed jig plate bore. The receiving hole in the jig plate must be finish-reamed to the correct press fit tolerance before installation. Once pressed in, this bushing is not designed for removal and reuse. Verify bore alignment with the jig design before pressing to final depth.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Press Fit Headed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.067 inches (Wire Size Number 51)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 13\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 19\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 3\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H1316BW\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51728162685234,"sku":"H1316BW","price":33.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_f2ce7cc5-cf83-4c83-9751-708c49e94a2d.jpg?v=1788688873","url":"https:\/\/voomisupply.com\/products\/boneham-h1316bw-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}