{"product_id":"boneham-h1012bp-press-fit-headed-drill-bushing-type-h","title":"Boneham H1012BP Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM H1012BP is a Type H press fit headed drill bushing used to guide drill bits and cutting tools with precision in jig and fixture applications. It features an inside diameter of 0.0595 inches, corresponding to a Number 53 wire gauge drill size, with an inside diameter tolerance of +0.0001 to +0.0004 inches for consistent, repeatable hole location. The body outside diameter is 5\/32 inches and the length under the head is 3\/4 inches. Constructed from steel, this bushing is installed permanently into a drill jig plate and is not designed for renewal or replacement after press fitting. Machinists, tool and die makers, and precision fabricators are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in drill jigs, fixtures, and production tooling where permanent, accurate drill guidance is required. The headed design with a counterbored seat allows the head to sit flush within the jig plate, preventing the bushing from being driven through during drilling operations. It is appropriate for light-duty to medium-duty production environments where close hole tolerances are critical and the bushing will remain fixed for the life of the tooling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method for permanent, non-renewable seating in jig plates\u003c\/li\u003e\n  \u003cli\u003eInside diameter of 0.0595 inches matches Number 53 wire gauge drill size\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0004 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eHeaded design with counterbored seat keeps bushing flush and secure during use\u003c\/li\u003e\n  \u003cli\u003eHead outside diameter of 1\/4 inches and head height of 3\/32 inches\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in production jig applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a permanent OEM-style press fit headed drill bushing for use in drill jigs and fixtures requiring a Type H bushing with a 0.0595-inch inside diameter and 5\/32-inch body outside diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit bushings are installed by a machinist or tool maker using an arbor press to seat the bushing flush into a counterbored hole in the jig plate. The jig plate hole should be machined to the appropriate interference fit tolerance before installation. Once pressed in, this bushing is not renewable and should not be removed without risk of damaging the jig plate. Always verify hole location and bushing orientation before pressing to final depth.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H Press Fit Headed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.0595 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Gauge)\u003c\/strong\u003e: Number 53\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 3\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H1012BP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51746570993970,"sku":"H1012BP","price":59.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b617461c6c05368cdcf2b33f32fca5ff_bd97e191-a6f8-4ea0-aeb6-f90e3319fd18.jpg?v=1788871414","url":"https:\/\/voomisupply.com\/products\/boneham-h1012bp-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}