{"product_id":"boneham-cb00001242-press-fit-headed-drill-bushing-type-h","title":"Boneham CB00001242 Press Fit Headed Drill Bushing Type H","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM CB00001242 is a Type H press fit headed drill bushing used to guide drill bits with precision in jig and fixture applications. It features a 0.041 inch inside diameter (wire gauge #59) and a 5\/32 inch body outside diameter, with a 3\/8 inch length under the head. The head outside diameter measures 1\/4 inch and the head height is 3\/32 inch. Constructed from steel, this bushing is pressed directly into a drill jig plate and held in place without a locking mechanism. It is a non-renewable, fixed installation component intended for production or repetitive drilling operations where consistent hole location is critical.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in drill jigs where a permanent, press-in guide is required. The headed design seats flush against the jig plate surface, controlling the depth and lateral position of the guide bore. Typical applications include metal fabrication shops, tool and die operations, and precision machining environments where repeatable hole placement is required across multiple workpieces. The inside diameter tolerance of +0.0001 to +0.0004 inches supports close-tolerance drilling with small-diameter bits.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType H press fit installation — no liner or locking collar required\u003c\/li\u003e\n  \u003cli\u003eInside diameter: 0.041 inches (wire gauge #59) with tolerance of +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003eBody outside diameter: 5\/32 inches; head outside diameter: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003eLength under head: 3\/8 inches; head height: 3\/32 inches\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in repetitive drilling applications\u003c\/li\u003e\n  \u003cli\u003eNon-renewable fixed design — intended for permanent jig installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Type H press fit headed drill bushing for use in drill jig plates requiring a permanent guide bushing with a headed flange seating surface.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bushing is installed by pressing it into a prepared jig plate bore using an arbor press or appropriate pressing fixture — do not hammer directly on the head. Ensure the mating bore in the jig plate is machined to the proper interference fit tolerance before installation. Once pressed in, the bushing is not intended to be removed or replaced. Installation is typically performed by toolmakers or machining professionals during jig fabrication or maintenance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Type H (Press Fit Headed)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.041 inches (Wire Gauge #59)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 3\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31171603\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CB00001242\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51728200761650,"sku":"CB00001242","price":43.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d6906546fc9a5f7dfdc2e223712fff14.jpg?v=1788689414","url":"https:\/\/voomisupply.com\/products\/boneham-cb00001242-press-fit-headed-drill-bushing-type-h","provider":"Voomi Supply","version":"1.0","type":"link"}