{"product_id":"boneham-cb00001084-headless-drill-bushing-7-32-in-id","title":"Boneham CB00001084 Headless Drill Bushing 7\/32 in Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM CB00001084 is a press fit headless drill bushing in industry code P, designed to guide cutting tools with precision in jig and fixture applications. Machined from steel and hardened to 60 to 65 HRC, this bushing delivers consistent bore alignment and long service life under repeated use. The headless profile sits flush with the jig plate surface, making it well suited for applications where a protruding head would interfere with workpiece seating. Inside diameter is 7\/32 inches with a tolerance of plus 0.0001 to plus 0.0004 inches, ensuring a controlled fit around standard drill sizes. Machinists and toolmakers are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs, fixtures, and production tooling setups where repeatable hole location is required. The 3\/8 inch outside diameter and 1 inch overall length suit it to moderate-depth jig plates in both prototype and production environments. It is pressed directly into a reamed hole in the jig body without a locking collar or retaining hardware, making it a permanent, non-renewable installation. Typical applications include metalworking shops, maintenance repair operations, and manufacturing toolrooms.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHeadless design sits flush with jig plate surface to avoid workpiece interference\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for wear resistance under repeated drilling cycles\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of plus 0.0001 to plus 0.0004 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003ePress fit installation into a reamed hole — no collar or locking hardware required\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n  \u003cli\u003eNon-renewable design for permanent fixture installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard tooling component for drill jigs and fixtures requiring a press fit headless bushing with 7\/32 inch ID and 3\/8 inch OD per ANSI specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinist technicians using an arbor press. The mating hole in the jig plate must be reamed to the appropriate interference fit diameter before pressing the bushing into place. Once pressed in, this bushing is not intended for removal and reuse. Verify bore alignment and check the bushing for concentricity after pressing to confirm proper seating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CB00001084\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51755021435186,"sku":"CB00001084","price":17.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_3a8a3057-83dd-4dce-855b-5f66db6f1c0a.jpg?v=1788950545","url":"https:\/\/voomisupply.com\/products\/boneham-cb00001084-headless-drill-bushing-7-32-in-id","provider":"Voomi Supply","version":"1.0","type":"link"}