{"product_id":"boneham-am00000604-drill-bushing-pm-5-6-mm-id","title":"Boneham AM00000604 Drill Bushing Pm 5.6 Mm Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM AM00000604 is a press fit headless drill bushing with a PM industry code, designed to guide drill bits and boring tools with precision in metalworking and machining operations. The bushing features a 5.6 mm inside diameter, a 10.00 mm body outside diameter, and an overall length of 16.00 mm. Manufactured from steel hardened to 60 to 65 HRC, it delivers the wear resistance required for repetitive drilling cycles on jigs and fixtures. The inside diameter tolerance is held to +0.004\/+0.012 mm, providing consistent hole location accuracy. Licensed machinists and tooling technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis drill bushing is suited for use in drill jigs, fixture plates, and production tooling setups where controlled hole location is critical. The headless, press fit design allows flush installation in applications where a flanged or renewable bushing would interfere with the workpiece or fixture surface. Typical applications include production machining environments in metalworking shops, aerospace component manufacturing, and general industrial fabrication where ANSI-compliant tooling is specified.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method for secure, permanent seating in the jig plate\u003c\/li\u003e\n  \u003cli\u003ePM industry code headless design for flush, low-profile installation\u003c\/li\u003e\n  \u003cli\u003e5.6 mm inside diameter with a tight tolerance of +0.004\/+0.012 mm for accurate hole guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life under high-cycle drilling\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensional and performance requirements\u003c\/li\u003e\n  \u003cli\u003eNon-renewable design — intended as a fixed, permanent fixture component\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or original fitment for press fit headless drill bushing applications conforming to ANSI PM-series dimensional standards in metalworking jigs and fixtures.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or tooling technician using an arbor press or hydraulic press to seat the bushing flush with the jig plate surface. The receiving hole in the jig plate must be machined to the correct interference fit tolerance before pressing the bushing in place. Power down and de-energize any associated machine tools before performing fixture work. Do not hammer the bushing directly — use a press and appropriate driver to avoid distortion of the bore.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 5.6 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.004\/+0.012 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 10.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 16.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: PM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: AM00000604\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51736202117426,"sku":"AM00000604","price":18.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_fe22bd5c-90a1-4ad5-8c1e-c01e0f3ab996.jpg?v=1788776499","url":"https:\/\/voomisupply.com\/products\/boneham-am00000604-drill-bushing-pm-5-6-mm-id","provider":"Voomi Supply","version":"1.0","type":"link"}