{"product_id":"boneham-am00000086-hm-press-fit-headless-drill-bushing-2-9mm","title":"Boneham AM00000086 Hm Press Fit Headless Drill Bushing 2.9mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM AM00000086 is a headless press fit drill bushing in industry code HM configuration, manufactured from hardened steel with a Rockwell hardness of 60 to 65 HRC. This bushing is designed to guide cutting tools with precision in jig and fixture applications. It features a 2.9 mm inside diameter with a close tolerance of +0.002\/+0.008 mm, a 6.00 mm body outside diameter, and an overall length of 12.00 mm. The headless profile allows it to sit flush within the jig plate without a retaining flange, keeping the tool path unobstructed. Machinists, tool and die makers, and production drilling fixture technicians are the primary installers of this component.\u003c\/p\u003e\n\u003cp\u003eThis drill bushing is suited for use in precision drilling jigs and fixtures across light manufacturing, metalworking, and production machining environments. The HM industry code designation identifies it as a headless, press fit style bushing intended for permanent or semi-permanent installation in a jig plate where tool guidance repeatability is critical. It is appropriate for applications where the bushing must seat flush with the jig plate surface and where the bore must hold tight positional tolerances across repeated drilling cycles. Sold individually, making it practical for single-hole fixture builds or direct replacement of a worn bushing.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHM industry code headless configuration seats flush with jig plate surface\u003c\/li\u003e\n  \u003cli\u003ePress fit installation method for secure, permanent seating without fasteners\u003c\/li\u003e\n  \u003cli\u003e2.9 mm inside diameter with tolerance of +0.002\/+0.008 mm for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction rated 60 to 65 HRC for long service life under repeated drilling loads\u003c\/li\u003e\n  \u003cli\u003eANSI-standard dimensions for compatibility with standard jig plate layouts\u003c\/li\u003e\n  \u003cli\u003eCompact 6.00 mm OD and 12.00 mm length suited for close-pitch fixture patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-build component for standard drilling jigs and fixtures requiring a headless, press fit drill bushing in the HM industry code designation with a 2.9 mm bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePress fit drill bushings are installed by qualified machinists or tool makers using an arbor press or hydraulic press — never struck in with a hammer, as impact installation risks cracking the bushing or distorting the bore. The jig plate bore must be machined to the correct interference fit diameter specified for the HM bushing OD before installation. Ensure the jig plate is fully deburred and cleaned before pressing the bushing in to achieve proper seating and alignment. Once installed, the bore should be inspected with a plug gauge to confirm the ID has not been distorted during press-in.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: HM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 2.9 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.002\/+0.008 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 6.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 12.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: AM00000086\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51747731308850,"sku":"AM00000086","price":26.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a3df753bfacdecf7a1650e3bb823de6_0b431d20-d6f5-4766-a255-00e079452282.jpg?v=1788884784","url":"https:\/\/voomisupply.com\/products\/boneham-am00000086-hm-press-fit-headless-drill-bushing-2-9mm","provider":"Voomi Supply","version":"1.0","type":"link"}