{"product_id":"belimo-ep100-lrx-e-pressure-independent-valve-1-in-18-2-gpm","title":"Belimo EP100+LRX-E Pressure Independent Valve 1 in 18.2 Gpm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BELIMO EP100+LRX-E is a pressure independent control valve (PICV) assembly combining a 2-way, 1-inch valve body with an electric rotary actuator for hydronic system flow control. The valve delivers equal percentage flow characteristics at a rated 18.2 GPM with a close-off pressure rating of 200 psi. The integrated actuator operates on 24 volts AC or DC and supports modulating control via BACnet MS\/TP, Modbus RTU, and MP-Bus communication protocols. Stainless steel trim provides corrosion resistance in chilled water and heating hot water applications. Licensed HVAC technicians and building automation specialists are the primary installers of this assembly.\u003c\/p\u003e\n\u003cp\u003eThis valve assembly is suited for commercial hydronic systems where variable flow and pressure independence are required for zone-level control. Typical applications include air handling unit coil circuits, fan coil units, and chilled or hot water distribution in variable primary or primary-secondary hydronic plants. The equal percentage flow characteristic makes it well matched to modulating control loops where precise flow management across a wide range of operating conditions is essential. The non-spring return actuator retains its last commanded position on power loss.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePressure independent design maintains rated flow regardless of differential pressure fluctuations in the system\u003c\/li\u003e\n  \u003cli\u003eRated flow of 18.2 GPM with 200 psi close-off pressure\u003c\/li\u003e\n  \u003cli\u003eDual-voltage actuator accepts 24 volts AC or 24 volts DC supply\u003c\/li\u003e\n  \u003cli\u003eModulating BACnet MS\/TP, Modbus RTU, and MP-Bus communication support for building automation integration\u003c\/li\u003e\n  \u003cli\u003eStainless steel trim for durability in both chilled water and heating hot water service\u003c\/li\u003e\n  \u003cli\u003eNon-spring return, electric actuator with 45 inch-pounds of torque\u003c\/li\u003e\n  \u003cli\u003eFemale NPT threaded connection for standard pipe installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style pressure independent control valve assembly for commercial hydronic systems requiring 2-way modulating flow control with BACnet MS\/TP, Modbus RTU, or MP-Bus network communication.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or building automation controls specialist familiar with hydronic piping and low-voltage wiring practices. Isolate and depressurize the hydronic system and shut off all electrical power to the circuit before beginning installation or removal. Female NPT connections should be made with appropriate thread sealant rated for the fluid service. BACnet, Modbus, or MP-Bus network wiring must comply with applicable local codes and the building automation system wiring requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Pattern\u003c\/strong\u003e: 2-Way\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Size\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Rate\u003c\/strong\u003e: 18.2 GPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClose-Off Pressure\u003c\/strong\u003e: 200 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Characteristic\u003c\/strong\u003e: Equal Percentage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Female NPT Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupply Voltage\u003c\/strong\u003e: 24 volts AC \/ 24 volts DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eActuator Type\u003c\/strong\u003e: Electric, Non-Spring Return\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eActuator Torque\u003c\/strong\u003e: 45 inch-pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControl Signal\u003c\/strong\u003e: Analog, Communicating (BACnet MS\/TP, Modbus RTU, MP-Bus)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAssembly Type\u003c\/strong\u003e: Valve and Actuator Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BELIMO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: EP100+LRX-E\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BELIMO","offers":[{"title":"Default Title","offer_id":51283977273650,"sku":"EP100+LRX-E","price":1130.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279089.jpg?v=1781064819","url":"https:\/\/voomisupply.com\/products\/belimo-ep100-lrx-e-pressure-independent-valve-1-in-18-2-gpm","provider":"Voomi Supply","version":"1.0","type":"link"}