{"product_id":"bando-700h100g-timing-belt-section-h-1in-140-teeth-neoprene","title":"Bando 700H100G Timing Belt Section H 1in 140 Teeth Neoprene","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BANDO 700H100G is a Series H trapezoidal timing belt designed for precise synchronous power transmission in industrial and HVAC drive applications. Constructed from neoprene with a fiberglass cord reinforcement, this belt delivers consistent pitch accuracy and resistance to heat, oil, and environmental exposure. It measures 70 inches in outside length, 1 inch (25.4 mm) in width, and 0.17 inches in height, with 140 trapezoidal teeth spaced on the standard H-series pitch. Rated for operating temperatures from -22 degrees F to 194 degrees F, it suits a wide range of mechanical drive systems where belt slip and timing drift are unacceptable.\u003c\/p\u003e\n\u003cp\u003eThis belt is used in synchronous drive systems across commercial HVAC equipment, industrial machinery, and other applications requiring accurate rotational timing between shafts. Series H belts are a common standard in blower assemblies, conveyor drives, and pump drive trains where load consistency and minimal stretch are critical. Licensed mechanical technicians and industrial maintenance professionals handle installation in both new equipment builds and replacement service scenarios.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSeries H trapezoidal tooth profile for positive synchronous drive engagement\u003c\/li\u003e\n  \u003cli\u003eNeoprene construction resists oil, heat, and moderate chemical exposure\u003c\/li\u003e\n  \u003cli\u003eFiberglass cord reinforcement minimizes belt stretch under load\u003c\/li\u003e\n  \u003cli\u003e140 teeth across a 70-inch outside length for accurate pitch repetition\u003c\/li\u003e\n  \u003cli\u003eOperating range of -22 degrees F to 194 degrees F suits demanding environments\u003c\/li\u003e\n  \u003cli\u003e1-inch (25.4 mm) width fits standard Series H pulley grooves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement timing belt for synchronous drive systems using Series H belt standards with a 1-inch width and 140-tooth count. Belt number 700H100 is the standard industry reference for this specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified mechanical or HVAC technician. Disengage and lock out all power to the drive system before removing the old belt or accessing pulleys. Verify pulley alignment and sheave condition before fitting the replacement belt, as misalignment accelerates tooth wear. Do not pry or force the belt over pulley flanges; reduce center distance to allow proper seating, then restore tension per the equipment manufacturer's specification.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Section\u003c\/strong\u003e: H (Series H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Number\u003c\/strong\u003e: 700H100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 140\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Profile\u003c\/strong\u003e: Trapezoidal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Length\u003c\/strong\u003e: 70 inches (1778 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Width\u003c\/strong\u003e: 1 inch (25.4 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Height\u003c\/strong\u003e: 0.17 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Material\u003c\/strong\u003e: Neoprene\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCord Material\u003c\/strong\u003e: Fiberglass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -22 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 194 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.43 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BANDO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 700H100G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BANDO","offers":[{"title":"Default Title","offer_id":51538828067122,"sku":"700H100G","price":71.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/387aecf0a175dbaa2ae431d86104c9f0.jpg?v=1785827703","url":"https:\/\/voomisupply.com\/products\/bando-700h100g-timing-belt-section-h-1in-140-teeth-neoprene","provider":"Voomi Supply","version":"1.0","type":"link"}