{"product_id":"bando-330h100g-timing-belt-section-h-66-teeth-neoprene","title":"Bando 330H100G Timing Belt Section H 66 Teeth Neoprene","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BANDO 330H100G is a Series H timing belt designed for synchronous power transmission in industrial and mechanical drive systems. It features 66 trapezoidal teeth with a 0.5-inch pitch and a 33.0-inch pitch length, delivering precise timing and positive drive without slip. The belt measures 1.0 inch wide and 0.17 inches in height, constructed from neoprene with a fiberglass tension cord for dimensional stability under load. This belt is installed by millwrights, maintenance technicians, and mechanical contractors in equipment requiring accurate shaft-to-shaft timing.\u003c\/p\u003e\n\u003cp\u003eThe 330H100G fits applications where Series H timing belts are specified, including conveyor drives, HVAC blower assemblies, pump drives, and light industrial machinery. The neoprene compound handles a working temperature range of -22 degrees F to 194 degrees F, making it suitable for both indoor climate-controlled environments and moderate-temperature mechanical rooms. It is a direct replacement for drives sized to the 330H100 belt number specification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSeries H trapezoidal tooth profile for positive, no-slip synchronous drive\u003c\/li\u003e\n  \u003cli\u003e66 teeth at 0.5-inch pitch over a 33.0-inch pitch length\u003c\/li\u003e\n  \u003cli\u003eNeoprene construction with fiberglass cord for stretch resistance and dimensional stability\u003c\/li\u003e\n  \u003cli\u003e1.0-inch belt width and 0.17-inch height suit standard Series H drive pulleys\u003c\/li\u003e\n  \u003cli\u003eOperating range from -22 degrees F to 194 degrees F\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 330H100 belt number applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct replacement for drives specifying belt number 330H100 in Series H timing belt applications. Fits standard Series H pulleys sized for a 1.0-inch wide belt with 0.5-inch pitch.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified technician with the drive system fully de-energized and locked out per applicable LOTO procedures before belt removal. Never pry or force the belt onto sprockets with excessive lateral stress, as this can damage the tension cord. Verify pulley alignment and proper center distance before tensioning, following the drive manufacturer's specifications for deflection or tension. Inspect mating sprockets for wear before installing a new belt.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Section\u003c\/strong\u003e: H (Series H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Number\u003c\/strong\u003e: 330H100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 66\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Shape\u003c\/strong\u003e: Trapezoidal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Pitch\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch Length\u003c\/strong\u003e: 33.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Length\u003c\/strong\u003e: 33.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Width\u003c\/strong\u003e: 1.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Height\u003c\/strong\u003e: 0.17 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt Material\u003c\/strong\u003e: Neoprene\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCord Material\u003c\/strong\u003e: Fiberglass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -22 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 194 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2013 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BANDO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 330H100G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BANDO","offers":[{"title":"Default Title","offer_id":51543018635570,"sku":"330H100G","price":54.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/387aecf0a175dbaa2ae431d86104c9f0_84adb08e-548a-4452-a65e-364309f22a5e.jpg?v=1785913775","url":"https:\/\/voomisupply.com\/products\/bando-330h100g-timing-belt-section-h-66-teeth-neoprene","provider":"Voomi Supply","version":"1.0","type":"link"}