{"product_id":"badger-meter-sdi1d1n10-0200-insertion-flow-meter","title":"Badger Meter SDI1D1N10-0200 Insertion Flow Meter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BADGER METER SDI1D1N10-0200 is an insertion-style flow meter designed for liquid flow measurement in industrial and commercial piping systems. It features a brass and PPS tip assembly with a tungsten carbide shaft, stainless steel impeller, and Torlon bearing for durability under continuous service conditions. The meter outputs a standard analog 4-20 mA signal, making it compatible with most building automation and process control systems. Rated to 1,000 psi maximum pressure and 180 degrees F maximum temperature, this unit suits demanding fluid monitoring applications. It carries a NEMA 4X enclosure rating for protection against washdowns and corrosive environments. No display is included. A licensed instrumentation or mechanical technician typically handles installation and commissioning.\u003c\/p\u003e\u003cp\u003eThis meter is suited for insertion into pipe sizes ranging from 1.5 inches to 10 inches (nominal). It is used in commercial HVAC hydronic systems, industrial process piping, and water distribution monitoring where a non-intrusive, direct-insert measurement solution is required. The 1-inch male NPT process connection allows direct threading into a prepared fitting or saddle on the pipe wall. Hot tap installation is not available with this configuration. The analog output integrates readily with PLCs, data loggers, and building management systems that accept a 4-20 mA input signal.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAnalog 4-20 mA output for direct integration with PLCs and BMS controllers\u003c\/li\u003e\n\u003cli\u003eBrass and PPS tip body with tungsten carbide shaft for corrosion and wear resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel impeller and Torlon bearing for reliable impeller rotation in demanding fluids\u003c\/li\u003e\n\u003cli\u003eNEMA 4X enclosure rating for washdown and corrosive environment protection\u003c\/li\u003e\n\u003cli\u003e1-inch male NPT process connection for straightforward field installation\u003c\/li\u003e\n\u003cli\u003eRated to 1,000 psi and 180 degrees F for high-pressure and elevated-temperature service\u003c\/li\u003e\n\u003cli\u003eNo display configuration minimizes enclosure complexity where remote signal monitoring is used\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for direct insertion into pipe sizes from 1.5 inches to 10 inches nominal diameter. Hot tap installation is not supported with this tip and connection configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified instrumentation technician or licensed mechanical contractor familiar with process piping and flow measurement equipment. Isolate and depressurize the pipe section before installing or removing the meter, and verify the system is vented and drained as required by site safety procedures. The 1-inch male NPT process connection should be made to a properly rated fitting or weld-o-let using appropriate thread sealant rated for the service fluid and temperature. Wiring of the 4-20 mA analog output should follow applicable NEC requirements for the installation class and environment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Insertion Flow Meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy\u003c\/strong\u003e: 1 percent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage\u003c\/strong\u003e: 24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Signal\u003c\/strong\u003e: Analog 4-20 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Connection\u003c\/strong\u003e: 1 inch Male NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pipe Size\u003c\/strong\u003e: 1.5 to 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure\u003c\/strong\u003e: 1,000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 180 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Rating\u003c\/strong\u003e: NEMA 4X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Brass and PPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material\u003c\/strong\u003e: Tungsten Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Material\u003c\/strong\u003e: Torlon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-Ring Material\u003c\/strong\u003e: Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: None\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BADGER METER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SDI1D1N10-0200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BADGER METER","offers":[{"title":"Default Title","offer_id":51284001423666,"sku":"SDI-1D1N10-0200","price":1963.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279137.jpg?v=1781065646","url":"https:\/\/voomisupply.com\/products\/badger-meter-sdi1d1n10-0200-insertion-flow-meter","provider":"Voomi Supply","version":"1.0","type":"link"}