{"product_id":"atkore-b1400hs-10gr-half-slot-channel-14-gauge-10-ft","title":"Atkore B1400HS-10GR Half Slot Channel 14 Gauge 10 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ATKORE B1400HS-10GR is a single-channel, half-slotted metal framing channel used to mount, brace, support, and connect structural loads in commercial and industrial building construction. Fabricated from cold-formed, hot-rolled pickled strip steel at 14 gauge thickness, this channel measures 1.625 inches wide by 0.813 inches tall and runs 10 feet in length. Slots are spaced on 2-inch centers and measure 9\/16 inch by 1-1\/8 inch. A green urethane powder coating is applied electrostatically after fabrication and cured through a 400-degree baking process for ten minutes, producing a minimum 1.5 mil coating thickness that resists chipping and peeling. Electricians, pipefitters, and mechanical contractors install this channel as part of strut-based support systems.\u003c\/p\u003e\n\u003cp\u003eThis half-slot channel is suited for residential, commercial, and light industrial applications where pipe, conduit, electrical raceways, or data wire systems require secure framing support. The half-slotted configuration reduces the open slot area compared to a full-slot channel, providing additional bearing surface along the channel flange. At 0.97 pounds per foot, the channel offers a practical balance of structural strength and manageable weight for overhead or wall-mounted framing assemblies. It is sold as an individual 10-foot length.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHalf-slotted single-channel configuration with 2-inch center slot spacing\u003c\/li\u003e\n  \u003cli\u003e14 gauge cold-formed strip steel construction for structural rigidity\u003c\/li\u003e\n  \u003cli\u003eSlots measure 9\/16 inch length by 1-1\/8 inch width for standard strut hardware fitment\u003c\/li\u003e\n  \u003cli\u003eGreen urethane powder coat finish cured at 400 degrees for minimum 1.5 mil thickness, resisting chipping and peeling\u003c\/li\u003e\n  \u003cli\u003e0.97 pounds per foot linear weight for efficient load estimation\u003c\/li\u003e\n  \u003cli\u003eCountry of origin: United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard fitment for strut-based metal framing assemblies used in pipe support, electrical conduit support, and data wire routing applications in building construction.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed electricians, pipefitters, or mechanical contractors following applicable building and electrical codes, including NEC requirements for conduit and raceway support. De-energize all circuits and shut off relevant utilities before working in areas where this channel will be installed adjacent to live systems. Use appropriate strut nuts, bolts, and beam clamps rated for the intended load. Cut ends should be deburred and, where corrosion resistance is a concern, treated with a compatible touch-up coating to maintain finish integrity.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel Type\u003c\/strong\u003e: Half Slot, Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Strip Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProcess\u003c\/strong\u003e: Cold Formed, Hot Rolled Pickled\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 14 Gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 10 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.813 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Area\u003c\/strong\u003e: 0.28 square inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot Center Spacing\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot Size\u003c\/strong\u003e: 9\/16 inch L x 1-1\/8 inch W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLinear Weight\u003c\/strong\u003e: 0.97 pounds per foot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Green Urethane Powder Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Thickness\u003c\/strong\u003e: 1.5 mil minimum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ATKORE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: B1400HS-10GR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ATKORE","offers":[{"title":"Default Title","offer_id":51284072137010,"sku":"B1400HS-10GR","price":595.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279658.jpg?v=1781067823","url":"https:\/\/voomisupply.com\/products\/atkore-b1400hs-10gr-half-slot-channel-14-gauge-10-ft","provider":"Voomi Supply","version":"1.0","type":"link"}