{"product_id":"atg-44-3745-xs-cut-resistant-gloves-xs-ansi-a3-nitrile","title":"Atg 44-3745\/XS Cut Resistant Gloves Xs Ansi A3 Nitrile","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ATG 44-3745\/XS is a cut-, puncture-, and abrasion-resistant work glove engineered for trade professionals who handle sharp materials, sheet metal, conduit, or rough surfaces on the job. Built on a 15-gauge engineered yarn shell with a seamless lining, the glove delivers ANSI Cut Level A3 and ANSI Puncture Level 2 protection without sacrificing dexterity. The palm and fingers are dipped in MicroFoam nitrile, giving installers a secure grip in light wet or oily conditions while maintaining enough tactile sensitivity for detail work. The nylon-spandex back keeps the fit close and allows full hand movement throughout a shift.\u003c\/p\u003e\n\u003cp\u003eThis glove is suited for general trade work in HVAC, electrical, plumbing, and light construction where cut hazards are present but a bulky leather glove would reduce tool control. The touchscreen-compatible palm coating lets technicians use phones or tablets without removing the glove. The reinforced thumb crotch addresses one of the most common wear points in gloves used for wire pulling, pipe handling, and sheet metal work. Appropriate for both residential and light commercial job sites. Sold as a paired set in size XS, fitting both men and women with smaller hand profiles.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eANSI Cut Level A3 and ANSI Puncture Level 2 protection from 15-gauge engineered yarn construction\u003c\/li\u003e\n  \u003cli\u003eANSI Abrasion Level 3 rated for durability against rough surfaces\u003c\/li\u003e\n  \u003cli\u003eMicroFoam nitrile palm and finger coating for grip in light wet or oily conditions\u003c\/li\u003e\n  \u003cli\u003eTouchscreen-compatible palm for phone and tablet use without glove removal\u003c\/li\u003e\n  \u003cli\u003eReinforced thumb crotch reduces wear at a high-stress contact point\u003c\/li\u003e\n  \u003cli\u003eSeamless lining and knit slip-on cuff for all-day comfort and easy donning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose cut-resistant work glove for trade professionals requiring ANSI A3 cut protection in size XS. Fits standard XS hand sizing for both men and women.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInspect gloves before each use for cuts, tears, or nitrile coating separation that would compromise protection. These gloves are not rated as a blood-borne pathogen barrier and should not be used as a substitute for medical-grade PPE. Always select PPE in accordance with the hazard assessment required by OSHA 1910.138. Replace gloves when the coating shows visible wear or when structural integrity is compromised.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: XS (X-Small, Unisex)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Cut Resistance Level\u003c\/strong\u003e: A3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Puncture Resistance Level\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Abrasion Resistance Level\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEN 388 Rating\u003c\/strong\u003e: 4442CX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Material\u003c\/strong\u003e: Nitrile (MicroFoam)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Coverage\u003c\/strong\u003e: Palm and Fingers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Style\u003c\/strong\u003e: Dipped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShell Material\u003c\/strong\u003e: 15-Gauge Engineered Yarn\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack Material\u003c\/strong\u003e: Engineered Yarn\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLining\u003c\/strong\u003e: Seamless Engineered Yarn\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCuff Style\u003c\/strong\u003e: Slip-On Knit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand\u003c\/strong\u003e: Paired\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.24 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: EN 388\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ATG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 44-3745\/XS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ATG","offers":[{"title":"Default Title","offer_id":51543150231858,"sku":"44-3745\/XS","price":28.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a03069e57fb33e7fc845ad88857bcdaf_a3716ff3-d8bd-4cf3-92fe-8b4c0f9830c4.jpg?v=1785916494","url":"https:\/\/voomisupply.com\/products\/atg-44-3745-xs-cut-resistant-gloves-xs-ansi-a3-nitrile","provider":"Voomi Supply","version":"1.0","type":"link"}