{"product_id":"anvil-0390037083-threaded-reducer-3x2-malleable-iron","title":"Anvil 0390037083 Threaded Reducer 3x2 Malleable Iron","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ANVIL 0390037083 is a threaded reducer fitting designed to connect piping runs where a 3-inch line steps down to a 2-inch line using male NPT (MNPT) threads on both ends. Constructed from Class 150 malleable iron and finished in orange, this fitting meets ASTM A47 material standards and carries FM Approval, NSF\/ANSI 61 certification, and cULus listing. It is sized at 2.5 inches in height, 3.5 inches in width, and 2.5 inches in length, with a shipping weight of 1.3 pounds. Licensed plumbers and pipefitters specify this reducer for fire protection, industrial, and commercial plumbing systems where a reliable, standards-compliant threaded transition is required.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for commercial and industrial piping installations where a 3-inch to 2-inch threaded reduction is needed in black iron or malleable iron pipe systems. Typical applications include fire suppression distribution headers, HVAC hydronic piping, and general commercial plumbing service lines. The NSF\/ANSI 61 certification makes it appropriate for systems that contact potable water. The FM Approval supports its use in fire protection piping where listed components are required by code.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClass 150 malleable iron construction meets ASTM A47 material standard\u003c\/li\u003e\n  \u003cli\u003eFM Approved for use in fire protection piping systems\u003c\/li\u003e\n  \u003cli\u003eNSF\/ANSI 61 certified for potable water contact applications\u003c\/li\u003e\n  \u003cli\u003ecULus Listed, meeting safety standards for the US and Canadian markets\u003c\/li\u003e\n  \u003cli\u003eMale NPT (MNPT) threaded end connections on both ends for standard pipe thread engagement\u003c\/li\u003e\n  \u003cli\u003eCompact form factor at 2.5 x 3.5 x 2.5 inches and 1.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation threaded reducer for Class 150 malleable iron pipe systems using MNPT thread connections in 3-inch by 2-inch configurations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable local plumbing codes and NFPA standards for fire protection systems. Isolate and depressurize the pipe system completely before removing or installing any threaded fitting. Apply an approved pipe thread sealant or PTFE tape to the male threads before assembly, and tighten to appropriate engagement without over-torquing, which can crack malleable iron fittings. For fire suppression applications, verify that all installed components carry the required FM or UL listing before system commissioning.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Thread Reducer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Size\u003c\/strong\u003e: 3 x 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded (MNPT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Orange\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClassification\u003c\/strong\u003e: Class 150\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: MNPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASTM A47, FM Approved, NSF\/ANSI 61, cULus Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ANVIL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 0390037083\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ASC ENGINEERED SOLUTIONS","offers":[{"title":"Default Title","offer_id":51539439485234,"sku":"0390037083","price":158.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/de11fb4b5a44939bb100defc759ff8de.jpg?v=1785840291","url":"https:\/\/voomisupply.com\/products\/anvil-0390037083-threaded-reducer-3x2-malleable-iron","provider":"Voomi Supply","version":"1.0","type":"link"}